Technical register for agricultural, construction and commercial machinery · sourced data
StartHarvesting machineryCLAAS › Super

CLAAS Super

Series: Other models

Wikimedia Commons · CC BY-SA 3.0 · Sj413 · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Super comes from CLAAS. The machine is 6,500 mm long, 5,700 mm wide and 3,700 mm high. The unladen weight is 2,400 kg. Unladen weight across the CLAAS range ranges from 1,950 to 25,400 kg; the Super sits at the bottom of that range with 2,400 kg. Its immediate neighbours are the Super-Junior below it with 1,950 kg and the Columbus above it with 2,410 kg. 541 CLAAS models across 24 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 2 sources are on file.

Technical data

Engine

EngineOttomotoren:VW Typ 122, (1.192 cm3, 17–22 kW)Dieselmotor: 22 kWcorrect

Dimensions and weights

Length6,500correct
Width5,700correct
Height3,700correct
Unladen weight2,400correct

Frequently asked questions

How much does the CLAAS Super weigh?

The unladen weight is 2,400 kg.

What are the dimensions of the CLAAS Super?

6,500 mm × 5,700 mm × 3,700 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare