StartHarvesting machineryCLAAS › Super-Junior

CLAAS Super-Junior

Series: Other models

Wikimedia Commons · CC BY-SA 4.0 · Johannes Maximilian · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Super-Junior is a machine built by CLAAS. The machine is 6,150 mm long, 2,900 mm wide and 2,850 mm high. The unladen weight is 1,950 kg. Unladen weight across the CLAAS range ranges from 1,950 to 25,400 kg; the Super-Junior sits at the bottom of that range with 1,950 kg. Its immediate neighbours are the Mäh-Dresch-Binder above it with 2,400 kg. 541 CLAAS models across 24 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 2 sources are on file.

Technical data

Engine

EngineVW Typ 122, (Otto, 1192 cm³, 17 kW)correct

Dimensions and weights

Length6,150correct
Width2,900correct
Height2,850correct
Unladen weight1,950correct

Frequently asked questions

How much does the CLAAS Super-Junior weigh?

The unladen weight is 1,950 kg.

What are the dimensions of the CLAAS Super-Junior?

6,150 mm × 2,900 mm × 2,850 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare