Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Axos 310

CLAAS Axos 310

Built: 2008–2015 · Series: Axos

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Axos 310 is a model in the Axos series. Production: 2008–2015. The engine delivers 75 hp (55 kW), has 4 cylinders, with a displacement of 4,400 cm³. Rated speed is 2,300 rpm. The machine is 4,181 mm long and 2,610 mm high. The unladen weight is 3,650 kg. The wheelbase measures 2,489 mm. Ground clearance is 399 mm. Top speed is 40 km/h. The tank holds 145 litres. Transmission: CLAAS. Tyres: front 13.6R24, rear 16.9R30. The fuel is diesel. The Axos series covers 12 models. Rated output within it ranges from 75 to 102 hp; the Axos 310 sits at the bottom of that range with 75 hp. Its immediate neighbours are the Axos 320 above it with 87 hp. Unladen weight within it ranges from 3,650 to 4,200 kg; here the Axos 310 sits at the bottom of that range with 3,650 kg. 856 CLAAS models across 54 series are on record.

CLAAS Axos – Entry-Level Series Since 2008, with Perkins Four-Cylinder Engines, 55 to 76 kW/75 to 102 hp and Operating Weight from 3,650 to 4,400 kg

CLAAS introduced the Axos in 2008 as a compact entry-level series positioned below the Arion; in the register, the production span of recorded models extends to the current Axos 3 model years. Engine output ranges from 55 to 76 kW, with models rated in horsepower spanning 75 to 102 hp, using four-cylinder engines with displacement from 3,595 to 4,400 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 3,650 to 4,400 kg, wheelbase of the recorded models is 2,489 mm, and top speed is 40 km/h. Within the Axos family, CLAAS distinguishes equipment lines with suffixes such as C, CL and CX, denoting different gearbox and cab variants.

Within the CLAAS range, the Axos is positioned as a simple, robust tractor for smaller and medium farms and as a second tractor on larger operations. Buyers of a used Axos should check the gearbox variant, as simple shuttle transmissions and powershift versions were offered in parallel.

With rated outputs from 55 to 76 kW, the Axos falls within ISO 730 Category II for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Perkins, the British engine maker supplying the series' four-cylinder diesel engines, is now part of the Caterpillar group and continues to produce engines and spare parts for these model years.

Sources: SpecCodex register, model data: CLAAS Axos, CLAAS

Technical data

Engine

Fueldieselcorrect
Power75 hp (55 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,181 mmcorrect
Height2,610 mmcorrect
Wheelbase2,489 mmcorrect
Ground clearance399 mmcorrect
Unladen weight3,650 kgcorrect

Drivetrain and chassis

GearboxCLAAScorrect
Front tyres13.6R24correct
Rear tyres16.9R30correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity145 lcorrect

Origin and approval

VersionAXOS 310 Ccorrect

Where this model stands

Power-to-weight ratio: 15.1 kW/t (55 kW / 3.6 t)

Power class: Universal (40–100 hp)

Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Axos 310 have?

The CLAAS Axos 310 delivers 75 hp.

How much does the CLAAS Axos 310 weigh?

The unladen weight is 3,650 kg.

What engine does the CLAAS Axos 310 have?

4 cylinders, 4,400 cm³ displacement, Diesel.

How fast does the CLAAS Axos 310 go?

Top speed is 40 km/h.

What are the dimensions of the CLAAS Axos 310?

4,181 mm × 2,610 mm.

When was the CLAAS Axos 310 built?

Production years: 2008–2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
2 current listings for CLAAS Axos 310 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare