Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Axion 960

CLAAS Axion 960

Built: 2017 · Series: Axion 900

More machines from model year 2017

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Axion 960 belongs to the Axion 900 series. Production: 2017. The engine delivers 440 hp (323 kW), has 6 cylinders, with a displacement of 8,710 cm³. Torque is 1,860 Nm. The machine is 5,744 mm long, 3,000 mm wide and 2,427 mm high. The wheelbase measures 3,150 mm. Top speed is 40 km/h. The engine is water-cooled. The gross vehicle weight is 18,000 kg. The fuel is diesel. The Axion 900 series covers 5 models. Rated output within it ranges from 315 to 440 hp; the Axion 960 sits at the top of that range with 440 hp. Its immediate neighbours are the Axion 950 below it with 405 hp. 856 CLAAS models across 54 series are on record.

Claas Axion 900 (from 2011) – the stepless high-horsepower tractor from Le Mans up to 440 hp: Axion 920 to 960, the number as power step, Cmatic as standard, Terra Trac as half-track, FPT six-cylinder of 8.7 litres

The Axion 900 is Claas's largest standard tractor – presented in 2011 as the range above the Axion 800, built in Le Mans and at 315 to 440 hp the competitor of the Fendt 900 and 1000, John Deere 8R and Case IH Magnum. The type logic: Axion marks the high-horsepower tractors, 900 the range with the 8.7-litre engine, the last digit the power step – 920 about 315 hp, 930 about 350, 940 about 380, 950 about 410, 960 about 440 hp – Cmatic the stepless transmission that is standard in this range, Terra Trac the half-track version with rubber track units on the rear axle since 2017. The engine is the FPT Cursor 9 six-cylinder of 8.7 litres at 2,150 rpm, with common-rail injection, variable-geometry turbocharger and SCR exhaust aftertreatment; the Cmatic transmission comes from ZF, front axle and cab are suspended, control runs through Cebis and the Cmotion drive lever.

Read on 3 more paragraphs

The register lists 5 versions with 232 to 323 kW (315 to 440 hp) from the six-cylinder of 8,710 cm³, torque of up to 1,860 Nm, unladen weights from 12,840 to 13,060 kg, a gross weight of 18,000 kg, lengths from 5,590 to 5,744 mm, widths from 2,930 to 3,000 mm and heights up to 3,452 mm.

The Axion 900 is the tractor of the large arable farms of eastern Germany, France, Poland and Ukraine – at 13 tonnes unladen and 18 tonnes gross for heavy tillage and slurry transport; Claas continues it with emission stage V and the Cemos assistance system.

On used tractors, operating hours, engine and SCR system, Cmatic transmission (oil history, calibration), front-axle and cab suspension, hydraulics and electronics, tyres or Terra Trac units count; parts run through the Claas dealer network.

Sources: SpecCodex register, model data: CLAAS Axion 900, CLAAS (Hersteller, Le Mans)

Technical data

Engine

Fueldieselcorrect
Power440 hp (323 kW)correct
Torque1,860 Nmcorrect
Cylinders6correct
Displacement8,710 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length5,744 mmcorrect
Width3,000 mmcorrect
Height2,427 mmcorrect
Wheelbase3,150 mmcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Top speed40 km/hcorrect

Frequently asked questions

How much power does the CLAAS Axion 960 have?

The CLAAS Axion 960 delivers 440 hp.

What is the gross vehicle weight of the CLAAS Axion 960?

18,000 kg.

What engine does the CLAAS Axion 960 have?

6 cylinders, 8,710 cm³ displacement, Diesel.

How fast does the CLAAS Axion 960 go?

Top speed is 40 km/h.

What are the dimensions of the CLAAS Axion 960?

5,744 mm × 3,000 mm × 2,427 mm.

When was the CLAAS Axion 960 built?

Production years: 2017.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
5 current listings for CLAAS Axion 960 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare