CLAAS Ares 567
Built: 2005–2007 · Series: Ares 500
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CLAAS Ares 500 – Ares 557, 567 and 577 from the Le Mans plant: four-cylinder diesel from 75 to 91.5 kW, 4,525 cm³ displacement and 4,820 kg operating weight, built 2002 to 2008
CLAAS built the Ares 500 range at its French plant in Le Mans, which emerged from the Renault Agriculture farm machinery division taken over in 2003. The three models Ares 557, 567 and 577 were produced between 2002 and 2008; the last two digits of the type designation rise with engine output within the range. The round, all-round-glazed cab with a wide field of view is a legacy of the Renault design that CLAAS initially retained after the takeover.
Read on 3 more paragraphs
The register lists 3 versions with 75 to 91.5 kW rated output at a constant 2,200 rpm. All three models share a four-cylinder diesel engine with 4,525 cm³ displacement and an operating weight of 4,820 kg, a length of 4,720 mm and a height of 2,905 mm.
The Ares 500 sat in the mid power segment for mixed operations combining fieldwork and transport, competing there with John Deere and Fendt. The constant engine base across all three output stages made spares stocking and workshop practice easier, while the round cab gave good all-round visibility for loader and trailer work.
When buying used, the condition of clutch and gearbox, the tightness of the hydraulic system, and corrosion on wings and cab floor rank among the key checks. For the cooling system and injection pump it is worth checking the service history, as well as the cab glazing seals; spare parts for the Ares range are available through the CLAAS dealer network.
Sources: SpecCodex register, model data: CLAAS Ares 500, CLAAS (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 116 hp (85 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,525 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,720 mmcorrect |
|---|---|
| Height | 2,905 mmcorrect |
| Wheelbase | 2,564 mmcorrect |
| Unladen weight | 4,820 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Front tyres | 14.9 R-28correct |
| Rear tyres | 18.4 R-38correct |
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 17.6 kW/t (85 kW / 4.8 t)
Power class: Large (100–180 hp)
Stronger than 73% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the CLAAS Ares 567 have?
The CLAAS Ares 567 delivers 116 hp.
How much does the CLAAS Ares 567 weigh?
The unladen weight is 4,820 kg.
What engine does the CLAAS Ares 567 have?
4 cylinders, 4,525 cm³ displacement, Diesel.
How fast does the CLAAS Ares 567 go?
Top speed is 40 km/h.
What are the dimensions of the CLAAS Ares 567?
4,720 mm × 2,905 mm.
When was the CLAAS Ares 567 built?
Production years: 2005–2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
3 current listings for CLAAS Ares 567 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.