Chevrolet CHEYENNE C30
Built: 1977 · Series: CHEYENNE
More machines from model year 1977
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chevrolet Cheyenne – the collective page of the C/K trim, later a stand-alone model: six- and eight-cylinder engines of 4,785 to 7,500 cm³
This collective page gathers the Chevrolet Cheyenne, originally a trim line on the Chevrolet C/K pickups that from the 1970s marked the upgraded specification, while Cheyenne Super denoted the sportier variant. In Mexico and much of Latin America the name later became a stand-alone model designation for Chevrolet's pickups; the register's model list correspondingly shows both classic C/K Cheyenne trims of the 1970s to 1990s and the later vehicles sold under the Cheyenne name.
Read on 3 more paragraphs
The register lists 15 versions with displacements from 4,785 to 7,500 cm³ from six- and eight-cylinder engines, unladen weights from 1,770 to 2,658 kg and gross weights from 2,268 to 3,500 kg; lengths lie between 4,910 and 5,000 mm, widths between 1,910 and 2,080 mm.
The Cheyenne name still stands for the high-volume base specification of American Chevrolet pickups and, especially in Mexico, is one of the best-selling commercial-vehicle names of all; the large-capacity six- and eight-cylinder engines of the older model years made it a rugged work vehicle for agriculture and trade.
On a used Cheyenne, rust on the frame and load bed, the condition of the carburettor or early injection, the mileage of the engine, and the condition of the clutch and automatic transmission all count; parts are readily sourced through the North American GM trade and specialist importers.
Sources: SpecCodex register, model data: Chevrolet Cheyenne, Chevrolet (General Motors, Hersteller)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 7,440 cm³correct |
Dimensions and weights
| Width | 2,000 mmcorrect |
|---|---|
| Wheelbase | 3,350 mmcorrect |
| Unladen weight | 2,400 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Chevrolet CHEYENNE C30 weigh?
The unladen weight is 2,400 kg.
What is the gross vehicle weight of the Chevrolet CHEYENNE C30?
3,500 kg.
What engine does the Chevrolet CHEYENNE C30 have?
8 cylinders, 7,440 cm³ displacement.
When was the Chevrolet CHEYENNE C30 built?
Production years: 1977.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CHEYENNE 1.0 PICK-UP
CHEYENNE 10 SUPER
CHEYENNE 2.0
CHEYENNE 20 LONGHORN
CHEYENNE 4WD
CHEYENNE C20
CHEYENNE PICK UP
CHEYENNE PICKUP
CHEYENNE SUPER 10
CHEYENNE SUPER 10 PICK-UP
CHEYENNE SUPER C10
CHEYENNE/10 PICK UP
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
