Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Chevrolet › C10 › C10 PICK-UP

Chevrolet C10 PICK-UP

Built: 1964-1986 · Series: C10

More machines from model year 1964

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The C10 series from Chevrolet includes the C10 PICK-UP. Production: 1964-1986. The engine delivers 168 kW, has 8 cylinders, with a displacement of 7,430 cm³. The vehicle is 5,160 mm long and 2,030 mm wide. The unladen weight is 2,158 kg. The wheelbase measures 3,340 mm. The gross vehicle weight is 2,744 kg. The vehicle runs on 4 wheels. The C10 series covers 37 models. Rated output within it ranges from 116 to 220 kW; the C10 PICK-UP sits in the middle of that range with 168 kW. Its immediate neighbours are the C10 below it with 120 kW and the C10 Apache above it with 170 kW. Unladen weight within it ranges from 1,797.5 to 2,523 kg; here the C10 PICK-UP sits in the middle of that range with 2,158 kg. 2857 Chevrolet models across 75 series are on record.

Chevrolet C10 – the collective page of the half-ton C/K series: C denotes rear-wheel drive, 10 the half-ton payload class, six- and eight-cylinder engines from 116 to 220 kW

The Chevrolet C10 is the half-ton pickup from General Motors' C/K series, built across three generations from 1960 to 1987: the first through 1966, the second ("Action Line") through 1972, and the third, square-bodied generation through 1987. The type designation follows a fixed scheme: C stands for rear-wheel drive (K for four-wheel drive), and the number 10 for the half-ton payload class, with 20 (three-quarter ton) and 30 (one ton) above it. Body styles ranged from the Fleetside pickup with smooth cargo sides to the Stepside with exposed rear fenders and the enclosed Panel Van; the C10 was built in the United States, Canada, and in CKD assembly in Brazil and Mexico as well.

Read on 3 more paragraphs

The register lists 37 versions of the C10, mostly with six- and eight-cylinder engines from 116 to 220 kW and roughly 4,100 to 7,400 cm³ displacement. Kerb weights range from 1,630 to 2,523 kg, gross vehicle weight from 2,080 to 3,500 kg, and the lengths recorded run from 4,800 to 5,400 mm.

As a half-ton pickup, the C10 competed directly with the Ford F-100/F-150 and the Dodge D100 and was for decades one of the best-selling pickups in North America, used as a work truck in trades and agriculture as much as a fleet vehicle. The third generation, the square body, is now a collector field in its own right with a large custom and restoration scene.

Buying used, check for rust on the frame, cab corners, door sills and cargo bed, the condition of the often-swapped six- and eight-cylinder engines (250/292 inline-six, 305/350/400/454 V8), the Turbo-Hydramatic automatic gearboxes, and the front drum or disc brakes. Parts supply for body, chassis and drivetrain components is very good given the huge production numbers and long build run.

Sources: SpecCodex register, model data: Chevrolet C10, Chevrolet (General Motors, Hersteller)

Technical data

Engine

Power168 kWcorrect
Cylinders8correct
Displacement7,430 cm³correct

Dimensions and weights

Length5,160 mmcorrect
Width2,030 mmcorrect
Wheelbase3,340 mmcorrect
Unladen weight2,158 kgcorrect
Gross vehicle weight2,744 kgcorrect

Drivetrain and chassis

Gears3.5correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 77.8 kW/t (168 kW / 2.2 t)

Stronger than 97% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Chevrolet C10 PICK-UP have?

The Chevrolet C10 PICK-UP delivers 168 kW.

How much does the Chevrolet C10 PICK-UP weigh?

The unladen weight is 2,158 kg.

What is the gross vehicle weight of the Chevrolet C10 PICK-UP?

2,744 kg.

What engine does the Chevrolet C10 PICK-UP have?

8 cylinders, 7,430 cm³ displacement.

What are the dimensions of the Chevrolet C10 PICK-UP?

5,160 mm × 2,030 mm.

When was the Chevrolet C10 PICK-UP built?

Production years: 1964-1986.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare