Start › Vans › Chevrolet › C10 Apache

Chevrolet C10 Apache

Built: 1960-1961 · Series: C10

Source: https://www.flickriver.com/photos/daveseven/2462112318/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Chevrolet C10 Apache is a machine built by Chevrolet. Production: 1960-1961. The engine delivers 170 kW, has 8 cylinders, with a displacement of 4,600 cm³. The machine is 4,800 mm long and 2,000 mm wide. The unladen weight is 1,880 kg. The wheelbase measures 2,920 mm. The gross vehicle weight is 2,360 kg. The machine runs on 4 wheels. Rated output across the Chevrolet range ranges from 16 to 365 kW; the C10 Apache sits in the middle of that range with 170 kW. Its immediate neighbours are the 1500 FLEETSIDE-454 SS-PICKUP-DC14N-L below it with 169 kW and the 1500 SPORTSIDE PICKUP-DC14Z above it with 171 kW. 2620 Chevrolet models across 10 series are on record. The model is listed under Vans. 12 verified figures from 1 source are on file.

Technical data

Engine

Power170 kWcorrect
Cylinders8correct
Displacement4,600 cm³correct

Dimensions and weights

Length4,800 mmcorrect
Width2,000 mmcorrect
Wheelbase2,920 mmcorrect
Unladen weight1,880 kgcorrect
Gross vehicle weight2,360 kgcorrect

Drivetrain and chassis

Wheels4correct

Where this model stands

Power-to-weight ratio: 90.4 kW/t (170 kW / 1.9 t)

Stronger than 97% of the vans in the register — out of 7,781 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Chevrolet C10 Apache have?

The Chevrolet C10 Apache delivers 170 kW.

How much does the Chevrolet C10 Apache weigh?

The unladen weight is 1,880 kg.

What is the gross vehicle weight of the Chevrolet C10 Apache?

2,360 kg.

What engine does the Chevrolet C10 Apache have?

8 cylinders, 4,600 cm³ displacement.

What are the dimensions of the Chevrolet C10 Apache?

4,800 mm × 2,000 mm.

When was the Chevrolet C10 Apache built?

Production years: 1960-1961.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

C-10

C-10 CUSTOM

C-10 FLEETSIDE

C-10 SILVERADO

C-10 STEPSIDE PICKUP

C10

C10 1/2 TON

C10 BONANZA

C10 CHEVROLET

C10 CHEYENNE

C10 CST

C10 CUSTOM

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare