Chevrolet BLAZER VAN-EK18C-E
Built: 1984 · Series: BLAZER
More machines from model year 1984
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chevrolet Blazer (K5): the collection page for the pickup-based off-roader with removable hardtop, K5 four-wheel-drive code, V8 engines from 121 to 142 kW
The Chevrolet K5 Blazer, built from 1969, was General Motors' answer to early off-roaders such as the Ford Bronco and shared its ladder frame with the C/K pickup line. The K5 code denotes the four-wheel-drive version in GM's size classification; early generations carried a fully removable soft top or hardtop over the entire passenger cell. Silverado marked the upper trim line, Van a closed body variant without rear side glazing; internal GM codes such as CK10516 denote the body and drivetrain combination.
Read on 3 more paragraphs
The register lists 18 versions here with 121 to 142 kW from exclusively eight-cylinder engines of 4,300 to 6,213 cm³ displacement, weights of 1,860 to 2,494 kg, gross vehicle weights of 2,223 to 3,405 kg and lengths of 4,640 to 4,800 mm.
The K5 Blazer positioned itself as a full-size off-roader with high towing capacity for agriculture, hunting and leisure use, competing with the Ford Bronco and Dodge Ramcharger, before the smaller second-generation Blazer took over the name in the 1990s.
On a used example, rust on the ladder frame, the sills and, on hardtop versions, the seals and latches of the removable roof are decisive; also check the transfer case and leaf-spring condition, the function of the carburettor or early fuel injection, and, given the vehicle's weight, the brakes carefully.
Sources: SpecCodex register, model data: Chevrolet Blazer, Chevrolet (General Motors, Hersteller), Zulassungsdaten RDW (Niederlande)
Technical data
Engine
| Displacement | 6,200 cm³correct |
|---|
Dimensions and weights
| Length | 4,650 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Unladen weight | 2,350 kgcorrect |
Frequently asked questions
How much does the Chevrolet BLAZER VAN-EK18C-E weigh?
The unladen weight is 2,350 kg.
What engine does the Chevrolet BLAZER VAN-EK18C-E have?
6,200 cm³ displacement.
What are the dimensions of the Chevrolet BLAZER VAN-EK18C-E?
4,650 mm × 1,990 mm.
When was the Chevrolet BLAZER VAN-EK18C-E built?
Production years: 1984.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
5D BLAZER AUTOMATIC-DT13W-4X4/272
BLAZER
BLAZER 4 WD
BLAZER 4000
BLAZER 4WD
BLAZER 4X4
BLAZER 4X4 K5
BLAZER AUTOMAAT
BLAZER CK 10516F
BLAZER K
BLAZER K 5
BLAZER K-5 SILVERADO 4X4 EK18C/2710
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.