Chevrolet APACHE 3204 STEPSIDE PICKUP
Built: 1958 · Series: APACHE
More machines from model year 1958
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chevrolet Apache – the pick-up sold in Mexico and Latin America: 10, 20 and 30 payload classes, Fleetside and Stepside bodies, six- and eight-cylinder engines 92 to 145 kW
Apache was initially, from 1958, the name of Chevrolet's light pick-up range in the United States, and from the 1960s it was carried on as the model name for trucks sold in Mexico and Latin America, while the C/K designation became established in parallel in the US. The numbers 10, 20 and 30 denote, as on the North American sister model, the payload class – roughly half a tonne, three-quarters of a tonne and a full tonne – while Fleetside denotes the smooth bed side and Stepside the stepped fender form with a running board.
Read on 3 more paragraphs
The register lists 38 versions with six- to eight-cylinder engines from 3,860 to 7,400 cc, outputs from 92 to 145 kW, kerb weights from 1,480 to 2,370 kg and gross vehicle weights from 1,580 to 3,500 kg; width ranges from 1,850 to 2,150 mm.
As the Apache, the range remained on sale in Mexico and much of Latin America for decades, long after it had been replaced by the C/K name in the US, competing there with Ford and Dodge for farm and trade buyers wanting a rugged, easily maintained pick-up.
When buying a used example, check for rust in the frame, load bed and wings, the condition of the carburettor and distributor on the older petrol engines, and wear in the leaf springs and front-axle kingpins; body and wear parts are well supported through the North American and Mexican vintage-parts trade, while Apache-specific chrome trim is scarcer.
Sources: SpecCodex register, model data: Chevrolet APACHE, Chevrolet (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 5,735 cm³correct |
Dimensions and weights
| Width | 1,920 mmcorrect |
|---|---|
| Wheelbase | 3,130 mmcorrect |
| Unladen weight | 1,870 kgcorrect |
| Gross vehicle weight | 2,619 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Chevrolet APACHE 3204 STEPSIDE PICKUP weigh?
The unladen weight is 1,870 kg.
What is the gross vehicle weight of the Chevrolet APACHE 3204 STEPSIDE PICKUP?
2,619 kg.
What engine does the Chevrolet APACHE 3204 STEPSIDE PICKUP have?
8 cylinders, 5,735 cm³ displacement.
When was the Chevrolet APACHE 3204 STEPSIDE PICKUP built?
Production years: 1958.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
APACHE 10
APACHE 1958
APACHE 20
APACHE 30
APACHE 31
APACHE 31 FLEETSIDE
APACHE 31 PICK-UP
APACHE 31 STEPSIDE
APACHE 31 STEPSITE
APACHE 3100
APACHE 3100 STEPSIDE
APACHE 3105
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.