StartTractorsChallenger › MT945C

Challenger MT945C

Built: 2010-2010 · Series: Other models

The photo shows the MT225B from the same series. Source: https://www.lectura-specs.com/en/model/municipal-technology/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Challenger MT945C rolled off the line in 2010 as a tractor. Engine output is 330 kW.

The fuel specified is diesel. The predecessor was the Challenger MT945B. Within the range, rated power spans from 16.8 to 470 kW; with 330 kW, the MT945C sits in the upper third. Directly alongside are the MT945B with 321 kW below and the MT855B with 340 kW above.

Technical data

Engine

Engine makeCaterpillarcorrect
Fueldieselcorrect
Power440 hp (330 kW)correct
Naturally aspiratednaturally aspiratedcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect

Origin and approval

PlantJackson, Minnesota, USAcorrect
PredecessorChallenger MT945Bcorrect

Other data

Main articleChallengercorrect

Frequently asked questions

How much power does the Challenger MT945C have?

The Challenger MT945C delivers 440 hp.

When was the Challenger MT945C built?

Production years: 2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare