Challenger MT875C
Built: 2010-2010 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Challenger MT875C rolled off the line in 2010 as a tractor. 436 kW is available.
Propulsion comes from tracked.
It runs on diesel; the engine is water-cooled. The predecessor was the Challenger MT875B. Within the range, rated power spans from 16.8 to 436 kW; with 436 kW, the MT875C sits at the top. Below it ranks the MT975B with 430 kW.
Technical data
Engine
| Engine make | Caterpillarcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 585 hp (436 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | tracked undercarriagecorrect |
|---|
Origin and approval
| Plant | Jackson, Minnesota, USAcorrect |
|---|---|
| Predecessor | Challenger MT875Bcorrect |
Frequently asked questions
How much power does the Challenger MT875C have?
The Challenger MT875C delivers 585 hp.
When was the Challenger MT875C built?
Production years: 2010.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.