StartTractorsChallenger › MT835C

Challenger MT835C

Built: 2010-2010 · Series: Other models

The photo shows the MT2295 from the same series. Source: http://www.tractordata.com/farm-tractors/005/5/1/5513-challe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Challenger MT835C rolled off the line in 2010 as a tractor. 310 kW is available.

Propulsion comes from tracked.

It runs on diesel; the engine is water-cooled. The predecessor was the Challenger MT835B. Within the range, rated power spans from 16.8 to 470 kW; with 310 kW, the MT835C sits in the upper third. Directly alongside are the MT845B with 298 kW below and the MT945B with 320 kW above.

Technical data

Engine

Engine makeCaterpillarcorrect
Fueldieselcorrect
Power410 hp (310 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantJackson, Minnesota, USAcorrect
PredecessorChallenger MT835Bcorrect

Frequently asked questions

How much power does the Challenger MT835C have?

The Challenger MT835C delivers 410 hp.

When was the Challenger MT835C built?

Production years: 2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare