StartTractorsChallenger › MT755B

Challenger MT755B

Built: 2007-2010 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Challenger MT755B rolled off the line in 2007-2010 as a tractor. The engine is rated at 183 kW.

Propulsion comes from tracked.

It runs on diesel; the engine is water-cooled. It replaced the Challenger MT755 and was in turn replaced by the Challenger MT755C. Within the range, rated power spans from 16.8 to 470 kW; with 183 kW, the MT755B sits in the mid-field. Directly alongside are the MT665B with 180 kW below and the MT665C with 190 kW above.

Technical data

Engine

Engine makeCaterpillarcorrect
Engine modelC-9correct
Fueldieselcorrect
Power245 hp (183 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantUSAcorrect
PredecessorChallenger MT755correct
SuccessorChallenger MT755Ccorrect

Frequently asked questions

How much power does the Challenger MT755B have?

The Challenger MT755B delivers 245 hp.

When was the Challenger MT755B built?

Production years: 2007-2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare