Challenger 648
Series: Other models
The Challenger 648 is a machine built by Challenger. The engine delivers 275 hp (205 kW). The engine comes from Sisu Diesel. The model was built in Italy. The fuel is diesel. Rated output across the Challenger range ranges from 24.2 to 585 hp; the 648 sits in the middle of that range with 275 hp. Its immediate neighbours are the MT755D below it with 260 hp and the 647C above it with 276 hp. 125 Challenger models across 7 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 1 source are on file.
Technical data
Engine
| Engine make | Sisu Dieselcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 275 hp (205 kW)correct |
Origin and approval
| Plant | Italycorrect |
|---|
Frequently asked questions
How much power does the Challenger 648 have?
The Challenger 648 delivers 275 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.