Challenger 652C

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Challenger 652C is a machine built by Challenger. The engine delivers 360 hp (270 kW). The engine comes from AGCO Power. The fuel is diesel. Its predecessor was the Challenger 652. Rated output across the Challenger range ranges from 24.2 to 585 hp; the 652C sits in the middle of that range with 360 hp. Its immediate neighbours are the MT765C below it with 320 hp and the MT685C above it with 370 hp. 125 Challenger models across 7 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 1 source are on file.

Technical data

Engine

Engine makeAGCO Powercorrect
Fueldieselcorrect
Power360 hp (270 kW)correct

Origin and approval

PredecessorChallenger 652correct

Frequently asked questions

How much power does the Challenger 652C have?

The Challenger 652C delivers 360 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare