Challenger MT325B 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Challenger MT325B belongs to the Challenger 4WD Tractor series. Under the bonnet works a three-cylinder engine displacing 3.3 litres, producing 69 hp (50.7 kW). Rated output is reached at 2,150 rpm, so it works in the lower rev range.
Top speed is 30 km/h. Unladen weight is 3,000 kg.
Within the range, rated power spans from 22.8 to 593 hp; with 68.9 hp, the MT325B sits in the mid-field. Directly alongside are the MT297B with 59.9 hp below and the MT335B with 79.1 hp above.
Technical data
Engine
| Power | 68.9 hp (50.7 kW)correct |
|---|---|
| Rated speed | 2,150 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,293.8 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Unladen weight | 3,000.1 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | Synchro Shuttlecorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
| Tyre size | 16.9-30(Rear)correct |
| Top speed | 29.9 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 59.8 l/mincorrect |
|---|---|
| Hydraulic pressure | 190correct |
| Fuel tank capacity | 109.8 lcorrect |
Other data
| Height | 1,051.6correct |
|---|
Where this model stands
Power-to-weight ratio: 16.9 kW/t (51 kW / 3 t)
Power class: Universal (40–100 hp)
Stronger than 49% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Challenger MT325B have?
The Challenger MT325B delivers 68.9 hp.
How much does the Challenger MT325B weigh?
The unladen weight is 3,000 kg.
What engine does the Challenger MT325B have?
3 cylinders, 3,294 cm³ displacement.
How fast does the Challenger MT325B go?
Top speed is 29.9 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.