Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Ceg Premium › DG › DG 280M-65-2

Ceg Premium DG 280M-65-2

Series: DG

Source: new.abb.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DG 280M-65-2 belongs to the DG series from Ceg Premium. The rated output is 110 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The housing is frame size 280 M in foot-mounted form. The protection class is IP56. The efficiency is 95.6 per cent at full load, 95.5 per cent at 75 per cent load and 94.5 per cent at half load. The motor weighs 630 kg. At full load it delivers 352.9 Nm. The motor is built in China. The figures come from the Australian MEPS register under standard AS/NZS 1359.5:2004; measured to AS/NZS 1359.102.3:2000. The DG series covers 68 models. Rated output within it ranges from 0.75 to 160 kW; the DG 280M-65-2 sits in the upper part of that range with 110 kW. Its immediate neighbours are the DG 315 S-85-6 below it with 90 kW and the DG 315S-65-2 above it with 132 kW. 68 Ceg Premium models are on record.

CEG Premium DG – three-phase motor range from the Italian maker in Vicenza, manufactured entirely in China, frame sizes 80 to 355, 0.75 to 160 kW, 2- to 8-pole

This page gathers the Premium DG range motors from CEG as listed in the Australian energy-efficiency register. CEG is an Italian electric-motor maker from Vicenza in the Veneto; the Premium DG range itself, however, is according to the register entries manufactured entirely in China. The type designations, such as DG 100 L-28-2 or DG 160L-42-4, follow the scheme DG <frame size> <length>-<digit sequence>-<pole count>.

Read on 3 more paragraphs

The register lists here 68 versions with 0.75 to 160 kW, two- to eight-pole, full-load efficiencies from 77.1 to 96.6% and at 75% load from 75.9 to 96.8%. Frame sizes run from 80 to 355, almost all motors are recorded with IP56 protection. Testing followed AS/NZS 1359.5:2004 throughout, with test method B; none of the 68 motors reaches a documented High Efficiency Level under GEMS.

Marketed as a "Premium" line, the DG range supplements CEG's programme, used chiefly in pumps, fans, compressors and conveying plant in the European and Australian markets, competing with larger Italian and international suppliers.

When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible corrosion on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size and pole count; since none of the motors carries a High Efficiency classification, actual efficiency under variable-speed drive operation should be checked case by case. Spares run through CEG's European distribution.

Sources: SpecCodex register, model data: CEG Premium DG

Technical data

Engine

Rated output110 kWcorrect

Dimensions and weights

Weight630 kgcorrect

Electrical data

Rated voltage400/690 Vcorrect
Number of poles2correct
Protection classIP56correct
Frame size280 M (foot)correct
Mounting (IEC 60034-7)B3, B34, B35, B5, B6, B7, B8, V1, V3, V15, V18, V19, V36, V4correct
Efficiency at full load95.6 %correct
Efficiency at 75 % load95.5 %correct
Efficiency at half load94.5 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedAS/NZS 1359.5:2004correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the Ceg Premium DG 280M-65-2 have?

The Ceg Premium DG 280M-65-2 delivers 110 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare