Case Steyr 9115 a

Built: 1995–2003 · Series: 9100er-Baureihe

More machines from model year 1995

Source: https://www.profi.de/panorama/youngtimer/cs-traktoren-von-ca

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case Steyr 9115 a belongs to the 9100er series. Production: 1995–2003. The engine delivers 115 hp (84.6 kW), has 6 cylinders, with a displacement of 6,596 cm³. Torque is 447 Nm. Rated speed is 2,300 rpm. The machine is 4,790 mm long, 2,450 mm wide and 2,850 mm high. The unladen weight is 5,245 kg. The wheelbase measures 2,806 mm. Ground clearance is 450 mm. Top speed is 30 km/h. Transmission: 24V/24R or 20V/20R. The engine is water-cooled. Tyres: front 16.9 R 24 AS, rear 18.4 R 38 AS. The fuel is Diesel/RME. The bore measures 108 mm. The stroke is 120 mm. Construction: unit construction (no separate frame). The 9100er-Baureihe series covers 4 models. Rated output within it ranges from 105 to 145 hp; the 9115 a sits in the lower part of that range with 115 hp. Its immediate neighbours are the 9105 a below it with 105 hp and the 9125 a above it with 125 hp. Unladen weight within it ranges from 5,015 to 5,285 kg; here the 9115 a sits at the top of that range with 5,245 kg. 13 Case Steyr models across 3 series are on record.

Case Steyr 9100 series – large tractors 9105a, 9115a, 9125a and 9145a from the 1990s Case-Steyr era, four- to six-cylinder diesels from 77 to 107 kW, all with four-wheel drive

The 9100 series emerged in the 1990s, when Case and Steyr worked closely together in tractor building; the 9105a, 9115a, 9125a and 9145a types form the mid to upper power class of this generation. The last two digits of the type designation roughly reflect the power in horsepower, while the trailing letter a consistently denotes four-wheel drive at Steyr; all four models listed here are accordingly built as four-wheel-drive tractors. The 9100s were built, like Steyr's other large series, at the St. Valentin plant.

Read on 3 more paragraphs

The register lists four versions here with 77.3 to 106.7 kW from four- to six-cylinder diesel engines with 4,397 to 6,596 cm³ displacement. Rated speed is 2,300 rpm, unladen weight ranges from 5,015 to 5,285 kg with lengths from 4,530 to 4,930 mm, widths from 2,450 to 2,515 mm and heights from 2,850 to 2,930 mm; torque lies between 385 and 562 Nm. The engines are approved for diesel or rapeseed oil methyl ester.

In this power class, the 9100 series was aimed at medium to larger farms with tillage and transport work and competed directly with comparable Case IH and Fendt ranges of the period.

When buying used, check the condition of the front axle differential and driveshafts of the four-wheel-drive steering, tightness of the hydraulic pump, wear on the clutch and powershift stages, and on RME operation the condition of injectors and fuel lines. Parts are available through the CNH network for Steyr and Case IH.

Sources: SpecCodex register, model data: Case Steyr 9100er-Baureihe, Steyr (CNH Industrial, Hersteller)

Technical data

Engine

Fuel	Diesel/RMEcorrect
Power	115 hp (84.6 kW)correct
Rated speed	2,300 rpmcorrect
Torque	447 Nmcorrect
Cylinders	6correct
Displacement	6,596 cm³correct
Bore	108 mmcorrect
Stroke	120 mmcorrect
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,790 mmcorrect
Width	2,450 mmcorrect
Height	2,850 mmcorrect
Wheelbase	2,806 mmcorrect
Ground clearance	450 mmcorrect
Unladen weight	5,245 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Gearbox	24V/24R or 20V/20Rcorrect
Front tyres	16.9 R 24 AScorrect
Rear tyres	18.4 R 38 AScorrect
Top speed	30 km/hcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 16.1 kW/t (85 kW / 5.2 t)

Power class: Large (100–180 hp)

Stronger than 72% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case Steyr 9115 a have?

The Case Steyr 9115 a delivers 115 hp.

How much does the Case Steyr 9115 a weigh?

The unladen weight is 5,245 kg.

What engine does the Case Steyr 9115 a have?

6 cylinders, 6,596 cm³ displacement, Diesel/RME.

How fast does the Case Steyr 9115 a go?

Top speed is 30 km/h.

What are the dimensions of the Case Steyr 9115 a?

4,790 mm × 2,450 mm × 2,850 mm.

When was the Case Steyr 9115 a built?

Production years: 1995–2003.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →