Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › Puma › PUMA 155 MC 50 KM/H

Case IH PUMA 155 MC 50 KM/H

Series: Puma

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Puma series from Case IH includes the PUMA 155 MC 50 KM/H. The engine delivers 150 kW, with a displacement of 6,728 cm³. The machine is 5,770 mm long and 2,550 mm wide. The unladen weight is 8,600 kg. The gross vehicle weight is 10,500 kg. The Puma series covers 83 models. Rated output within it ranges from 93.4 to 222 kW; the PUMA 155 MC 50 KM/H sits in the middle of that range with 150 kW. Its immediate neighbours are the Puma 195 CVX below it with 147 kW and the PUMA 175 CVX above it with 151 kW. Unladen weight within it ranges from 6,015 to 10,000 kg; here the PUMA 155 MC 50 KM/H sits in the upper part of that range with 8,600 kg. 1222 Case IH models across 76 series are on record.

Case IH Puma – Six-Cylinder Tractor Between Maxxum and Magnum: Concept, Technology, Generations, 93.4 to 222 kW and Operating Weight from 6,015 to 10,000 kg

Case IH launched the Puma series in 2007 to replace the CS and MXM lines. The tractors share their platform with the New Holland T7000 and use six-cylinder FPT Industrial engines displacing 6,700 to 6,728 cm³. Registered engine output ranges from 93 to 222 kW, while the models listed with a horsepower rating span 127 to 225 hp.

Read on 3 more paragraphs

Case IH offered the Puma with either a conventional powershift gearbox or the stepless CVX transmission; in later model years CVX became the series' standard. Recorded operating weight runs from 6,015 to 10,000 kg, wheelbase from 2,786 to 2,884 mm, and the rated travel speed of the listed variants is 40 km/h.

Within the Case IH line-up the Puma sits between the smaller Maxxum and the larger Magnum, aimed at mixed farms combining arable work, grassland and transport duties. Production takes place at the Basildon plant in the UK. Buyers looking at a used Puma should check the gearbox type, emissions stage and equipment level, since these vary considerably across the model's long production run.

With rated outputs from 93.4 to 222 kW, the Puma falls within ISO 730 Category III for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. FPT Industrial, the engine maker within the CNH Industrial group, still manufactures engines and spare parts for these model years.

Sources: SpecCodex register, model data: Case IH Puma, Case IH

Technical data

Engine

Power150 kWcorrect
Displacement6,728 cm³correct

Dimensions and weights

Length5,770 mmcorrect
Width2,550 mmcorrect
Unladen weight8,600 kgcorrect
Gross vehicle weight10,500 kgcorrect

Where this model stands

Power-to-weight ratio: 17.4 kW/t (150 kW / 8.6 t)

Power class: Heavy (> 180 hp)

Stronger than 91% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH PUMA 155 MC 50 KM/H have?

The Case IH PUMA 155 MC 50 KM/H delivers 150 kW.

How much does the Case IH PUMA 155 MC 50 KM/H weigh?

The unladen weight is 8,600 kg.

What is the gross vehicle weight of the Case IH PUMA 155 MC 50 KM/H?

10,500 kg.

What engine does the Case IH PUMA 155 MC 50 KM/H have?

6,728 cm³ displacement.

What are the dimensions of the Case IH PUMA 155 MC 50 KM/H?

5,770 mm × 2,550 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare