Case IH OPTUM 300 (2018-Present) 4WD
Series: Optum
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | Case IH FPTcorrect |
|---|---|
| Engine model | Optum 300 (2018-Present)correct |
| Cylinders | 6correct |
| Displacement | 6,700.7 cm³correct |
| Aspiration | eVGT Turbocharged, air-to-air aftercooledcorrect |
Dimensions and weights
| Width | 3,023.1correct |
|---|
Drivetrain and chassis
| Gearbox type | Continuously Variablecorrect |
|---|
Other data
| Height | 3,366correct |
|---|
Frequently asked questions
What engine does the Case IH OPTUM 300 (2018-Present) have?
6 cylinders, 6,701 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
OPTUM 250 CVX
OPTUM 270 (2018-Present)
OPTUM 270 CVT (2016-2017)
OPTUM 270CVX
OPTUM 300
OPTUM 300 CVT (2016-2017)
OPTUM 300 CVX
OPTUM 300CVX
Optum 250 CVX Drive
Optum 270 CVX
Optum 300 CVXDrive
Optum 340 CVX
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.