Case IH (cnh) RB444
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Unladen weight | 138 kgcorrect |
|---|
Other data
| Balken anzahl | 4correct |
|---|---|
| Ballengewicht max kg | 340 kgcorrect |
| Ballengewicht min kg | 136 kgcorrect |
| Garnart | Electric, manualcorrect |
| Garnrollen | 4correct |
| Hubart | single-cam trackcorrect |
| Pto power required kw | 26 kWcorrect |
| Riemen anzahl | 6correct |
| Riemenbreite mm | 177.8 mmcorrect |
| Zinken anzahl | 72correct |
Frequently asked questions
How much does the Case IH (cnh) RB444 weigh?
The unladen weight is 138 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
LBX332 Packer Cutter
LBX332 Rotor Cutter
LBX332 Standard
LBX432 Rotor Cutter
LBX432 Standard
RB454
RB454 Rotor Cutter Silage
RB454 Silage
RB455
RB455A
RB464
RB465
Sources: [1]
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.