Case IH (CNH) SBX530
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH balers – other models: the LBX large square balers, RB round balers and SBX small square balers, lengths 3.43 to 8.86 m, weights up to 9,350 kg
This page gathers Case IH balers the register could not assign to a single named range: the small square balers of the SBX range, the round balers of the RB range from RB444 to RB565, and the large square balers LBX332 and LBX432, each in versions with rotor cutter or packer pickup. Case IH, like New Holland, belongs to the CNH Industrial group, which builds balers of both brands on shared technical platforms.
Read on 3 more paragraphs
The register lists here 20 versions with lengths of 3,430 to 8,860 mm, widths of 1,930 to 3,050 mm and heights of 1,420 to 3,120 mm; on the heavy LBX-range square balers, weights reach up to 9,349.9 kg.
With this span, Case IH's baler line-up covers almost the entire field of forage harvesting, from the small bale for hobby and equestrian operations to the heavy large baler for contracting use, from straw through hay to silage on the rotor-cutter versions.
When buying a used baler, the condition of the knotter or binding unit, wear on the pickup and bale chamber, and the state of the belts or plunger rank among the key checkpoints; on rotor-cutter versions, the condition of the knives too. Spare parts run through the Case IH dealer network, which overlaps considerably with the New Holland network thanks to the two brands shared technical platforms; tyre and axle condition is also worth checking, especially on balers used for transport on public roads.
Sources: Kennwerte der Modelle Case IH Ballenpressen (weitere Modelle), Case IH (Hersteller)
Technical data
Engine
| PTO power required | 46.2 kWcorrect |
|---|
Dimensions and weights
| Length | 6,250 mmcorrect |
|---|---|
| Width | 2,800 mmcorrect |
| Height | 1,730 mmcorrect |
| Unladen weight | 1,539 kgcorrect |
Working data
| Number of tines | 110correct |
|---|---|
| Twine rolls | 6correct |
| Number of knife bars | 5correct |
| Twine tying | knottercorrect |
Other data
| Hubart | manual lift crankcorrect |
|---|---|
| Lagerart | 5 sealed ballcorrect |
Frequently asked questions
How much does the Case IH (CNH) SBX530 weigh?
The unladen weight is 1,539 kg.
What are the dimensions of the Case IH (CNH) SBX530?
6,250 mm × 2,800 mm × 1,730 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
LBX332 Packer Cutter
LBX332 Rotor Cutter
LBX332 Standard
LBX432 Rotor Cutter
LBX432 Standard
RB444
RB454
RB454 Rotor Cutter Silage
RB454 Silage
RB455
RB455A
RB464
Sources: [1]
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.