Case IH 733
Built: 1980–1989 · Series: A
More machines from model year 1980
Case IH 533 to 933 (1985–1990) – the Neuss utility tractors of the first Case IH years: the final digits 33 as series, the first digit as size class, A for four-wheel drive, V for the vineyard version
The 33 series is the last tractor generation from the IH plant in Neuss on the Rhine that continued under the new name Case IH after the merger of Case and International Harvester in 1985 – the successors to the 55 series (633 to 1055) with which Neuss had served the German market since the 1950s, until Case IH closed the plant in 1997. The type logic: the final digits 33 mark the series, the first digit orders the size in ascending order – 533 about 45 hp, 733 about 60, 833 about 70, 933 about 80 hp – A four-wheel drive, V the vineyard version (V533) about 1.17 metres wide. The engines are IH's own three- and four-cylinders from Neuss – D-155 of 2.5 litres, D-179 and D-206 of 2.9 and 3.4 litres, D-239 of 3.9 litres – at 2,180 to 2,300 rpm, water-cooled with direct injection; the transmissions were synchromesh gearboxes with eight or sixteen speeds, the cabs the versions with roll bar or comfort cab, as the register distinguishes in the weights.
Read on 3 more paragraphs
The register lists 5 versions with 33 to 53 kW from three- and four-cylinders of 2,536 to 3,911 cm³, unladen weights from 1,800 to 2,770 kg depending on roll-bar or cab version, lengths from 3,285 to 3,570 mm, widths from 1,168 to 1,990 mm and heights from 2,208 to 2,450 mm.
The 33s are still numerous at work on grassland and part-time farms in Germany, Austria and France – simple, repair-friendly tractors whose Neuss engines are regarded as particularly long-lived; the successors 3200 and 4200 came from Doncaster.
On used tractors, operating hours, engine condition and injection pump, clutch and gearbox, four-wheel-drive clutch on A models, hydraulics, cab and sheet metal count; parts run through Case IH and Neuss specialists and are inexpensive.
Sources: SpecCodex register, model data: Case IH 33er-Reihe (533 bis 933), Case IH (manufacturer)
Technical data
Engine
| Power | 60 hp (44 kW)correct |
|---|---|
| Rated speed | 2,180 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,382 cm³correct |
Dimensions and weights
| Length | 3,530 mmcorrect |
|---|---|
| Width | 1,640 mmcorrect |
| Height | 2,450 mmcorrect |
| Wheelbase | 2,190 mmcorrect |
| Unladen weight | 2,360 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8+4/16+8correct |
| Front tyres | 7.50-16 AS, 6 PRcorrect |
| Rear tyres | 13, 6-36 AS, 6PRcorrect |
| Top speed | 25 km/hcorrect |
Origin and approval
| Units built | 10,513correct |
|---|
Where this model stands
Power-to-weight ratio: 18.6 kW/t (44 kW / 2.4 t)
Power class: Universal (40–100 hp)
Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Case IH 733 have?
The Case IH 733 delivers 60 hp.
How much does the Case IH 733 weigh?
The unladen weight is 2,360 kg.
What engine does the Case IH 733 have?
4 cylinders, 3,382 cm³ displacement.
How fast does the Case IH 733 go?
Top speed is 25 km/h.
What are the dimensions of the Case IH 733?
3,530 mm × 1,640 mm × 2,450 mm.
When was the Case IH 733 built?
Production years: 1980–1989.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.