Start › Tractors › Case IH › 5200-Baureihe › 5220 (DT)

Case IH 5220 (DT)

Built: 1989–1997 · Series: 5200-Baureihe

More machines from model year 1989

Source: https://www.agrarheute.com/technik/traktoren/case-ih-stellt-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 5200 series from Case IH includes the 5220 (DT). Production: 1989–1997. The engine delivers 94 hp (69.1 kW), has 4 cylinders, with a displacement of 3,922 cm³. Torque is 321 Nm. Rated speed is 2,200 rpm. The machine is 4,140 mm long, 2,025 mm wide and 2,672 mm high. The unladen weight is 4,000 kg. The wheelbase measures 2,730 mm. Ground clearance is 561 mm. Top speed is 25 km/h. Transmission: 16 V/12 R or 24 V/20 R. The engine is water-cooled. Tyres: front 7.50-16 ASF (DT: 13.6 R 24 AS), rear 18.4-30 AS (DT: 18.4 R 34 AS). The fuel is diesel. The bore measures 102 mm. The stroke is 120 mm. The compression ratio is 16.5:1. Maximum torque is reached at 1,503 rpm. Construction: semi-frame construction. Around 9046 units were built. Rated output across the Case IH range ranges from 31.4 to 500 hp; the 5220 (DT) sits at the bottom of that range with 94 hp. Its immediate neighbours are the JX1095N below it with 92.3 hp and the Farmall 95A above it with 95 hp. Rated output across the Case IH range ranges from 23.1 to 373 kW; here the 5220 (DT) sits at the bottom of that range with 69.1 kW. 1222 Case IH models across 76 series are on record.

Case IH 5220 and 5230 (DT) – four-wheel-drive universal tractors of the 5200 range: four- and six-cylinder diesel engines of 69.1 to 72.8 kW, 321 to 355 Nm, 4,000 to 4,480 kg

Case IH's 5200 range belongs to the Maxxum generation of the 1990s and is represented here by the 5220 (DT) and 5230 (DT) types; at Case IH, the DT suffix stands for Dual Traction, the engageable four-wheel drive that distinguishes these models from the two-wheel-drive versions in the range. The number sequence orders the models by rising power within the 5200 series.

Read on 3 more paragraphs

The register lists here 2 versions with 69.1 to 72.8 kW from four- to six-cylinder diesel engines of 3,922 to 5,883 cm³ displacement, torques from 321 to 355 Nm at a rated speed of 2,200 rpm, weights from 4,000 to 4,480 kg, lengths from 4,140 to 4,390 mm, widths from 2,025 to 2,438 mm and heights from 2,672 to 2,695 mm.

With four-wheel drive and this power class, the 5200 range occupied the mid-to-upper segment of the Case IH line-up and competed with comparable four-wheel-drive tractors from John Deere, Massey Ferguson and Fendt; the main use was on mixed arable farms needing pulling power for heavy cultivation and transport.

Buying one of these four-wheel-drive tractors used, the condition and play of the front axle and the four-wheel-drive clutch, the tightness of the engine and hydraulics, and the condition of the clutch and gearbox all matter; the electronics and wiring loom should also be checked for faults. Spare parts run through the Case IH dealer network, which remains well set up for this range.

Sources: SpecCodex register, model data: Case IH 5200-Baureihe, Case IH

Technical data

Engine

Fuel	dieselcorrect
Power	94 hp (69.1 kW)correct
Rated speed	2,200 rpmcorrect
Torque	321 Nmcorrect
Speed at max. torque	1,503 rpmcorrect
Cylinders	4correct
Displacement	3,922 cm³correct
Bore	102 mmcorrect
Stroke	120 mmcorrect
Compression ratio	16.5correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,140 mmcorrect
Width	2,025 mmcorrect
Height	2,672 mmcorrect
Wheelbase	2,730 mmcorrect
Ground clearance	561 mmcorrect
Unladen weight	4,000 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	16 V/12 R or 24 V/20 Rcorrect
Front tyres	7.50-16 ASF (DT: 13.6 R 24 AS)correct
Rear tyres	18.4-30 AS (DT: 18.4 R 34 AS)correct
Top speed	25 km/hcorrect

Origin and approval

Construction	semi-frame constructioncorrect
Units built	9,046correct

Where this model stands

Power-to-weight ratio: 17.3 kW/t (69 kW / 4 t)

Power class: Universal (40–100 hp)

Stronger than 63% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH 5220 (DT) have?

The Case IH 5220 (DT) delivers 94 hp.

How much does the Case IH 5220 (DT) weigh?

The unladen weight is 4,000 kg.

What engine does the Case IH 5220 (DT) have?

4 cylinders, 3,922 cm³ displacement, Diesel.

How fast does the Case IH 5220 (DT) go?

Top speed is 25 km/h.

What are the dimensions of the Case IH 5220 (DT)?

4,140 mm × 2,025 mm × 2,672 mm.

When was the Case IH 5220 (DT) built?

Production years: 1989–1997.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →