Start › Tractors › Case IH › 3210

Case IH 3210

Built: 1993–1998 · Series: 3200/4200

More machines from model year 1993

Source: https://www.technikboerse.com/gebraucht/traktor-1/case-ih-19

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 3210 from Case IH is part of the 3200/4200 series. Production: 1993–1998. The engine delivers 45 hp (33.1 kW), has 3 cylinders, with a displacement of 2,536 cm³. Torque is 159 Nm. Rated speed is 2,200 rpm. The machine is 3,535 mm long, 1,840 mm wide and 2,376 mm high. The unladen weight is 2,720 kg. The wheelbase measures 2,007 mm. Ground clearance is 215 mm. Top speed is 30 km/h. The tank holds 112 litres. Transmission: 8 V/4 R, 16 V/8 R and 8 V/8 R. The engine is water-cooled. Tyres: front 7.50-16 ASF (DT: 8.3 R 24 AS), rear 12.4 R 32 AS. The fuel is diesel. The bore measures 98.4 mm. The stroke is 111.1 mm. The compression ratio is 16:1. Maximum torque is reached at 1,600 rpm. Construction: unit construction (no separate frame). The linkage is category I/II. The PTO runs at 540/1000 rpm. The 3200/4200 series covers 4 models. Rated output within it ranges from 45 to 90 hp; the 3210 sits at the bottom of that range with 45 hp. Its immediate neighbours are the 3220 (DT) above it with 52 hp. Unladen weight within it ranges from 2,675 to 3,035 kg; here the 3210 sits at the bottom of that range with 2,720 kg. 1222 Case IH models across 76 series are on record.

Case IH 3200/4200 – British utility tractors from Doncaster: three- and four-cylinder diesels, 2,536 to 4,389 cm³, 33 to 66 kW, models 3210 to 4240 PRO

The Case IH 3200 and 4200 were utility tractors that Case IH built during the 1990s at its English plant in Doncaster. The type designation is a four-digit number; suffixes such as DT on the 3220 or PRO on the 4240 mark individual versions within each range. The register lists the 3210, 3220 (DT), 3230 and 4240 (PRO) models, powered by three- and four-cylinder diesel engines.

Read on 3 more paragraphs

The register holds 4 versions rated at 33.1 to 66.2 kW (45 to 60 hp), with engines of 2,536 to 4,389 cm³ and three to four cylinders. Weights range from 2,675 to 3,035 kg, lengths from 3,535 to 3,759 mm, widths from 1,840 to 1,860 mm and heights from 2,376 to 2,666 mm. Torque falls between 159 and 220 Nm at 2,180 to 2,400 rpm.

As utility tractors, the 3200 and 4200 targeted smaller and medium-sized farms that needed a manoeuvrable, versatile tractor for yard work, haulage and light field tasks. They competed directly with comparable utility models from Ford, Massey Ferguson and Deutz-Fahr in the same power class.

When buying used, check the engine and injection pump, clutch and gearbox, and look for rust on panels, mudguards and the cab. Hydraulic hoses and the PTO should be checked for leaks and wear; spare parts for the smaller Case IH utility ranges are available through the Case IH dealer network and independent agricultural parts suppliers.

Sources: SpecCodex register, model data: Case IH 3200/4200, Case IH

Technical data

Engine

Fuel	dieselcorrect
Power	45 hp (33.1 kW)correct
Rated speed	2,200 rpmcorrect
Torque	159 Nmcorrect
Speed at max. torque	1,600 rpmcorrect
Cylinders	3correct
Displacement	2,536 cm³correct
Bore	98.4 mmcorrect
Stroke	111.1 mmcorrect
Compression ratio	16correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,535 mmcorrect
Width	1,840 mmcorrect
Height	2,376 mmcorrect
Wheelbase	2,007 mmcorrect
Ground clearance	215 mmcorrect
Unladen weight	2,720 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	8 V/4 R, 16 V/8 R and 8 V/8 Rcorrect
Front tyres	7.50-16 ASF (DT: 8.3 R 24 AS)correct
Rear tyres	12.4 R 32 AScorrect
Top speed	30 km/hcorrect

Working data

Fuel tank capacity	112 lcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Other data

Linkage category	Cat I/IIcorrect
PTO speed	540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 12.2 kW/t (33 kW / 2.7 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH 3210 have?

The Case IH 3210 delivers 45 hp.

How much does the Case IH 3210 weigh?

The unladen weight is 2,720 kg.

What engine does the Case IH 3210 have?

3 cylinders, 2,536 cm³ displacement, Diesel.

How fast does the Case IH 3210 go?

Top speed is 30 km/h.

What are the dimensions of the Case IH 3210?

3,535 mm × 1,840 mm × 2,376 mm.

When was the Case IH 3210 built?

Production years: 1993–1998.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →