StartExcavators & compactionCase › CX470B

Case CX470B

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CX470B from Case is part of the Case Hydraulic Excavator series. The engine delivers 270 kW, has 6 cylinders, with a displacement of 9,832.2 cm³. Torque is 1,434.5 Nm. Rated speed is 1,950 rpm. The unladen weight is 47,083 kg. Ground clearance is 542.5 mm. The tank holds 650.3 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 720.4 l/min. The hydraulic tank holds 460.3 litres. Working pressure is 314 bar. The cooling system holds 38.2 litres. The oil fill is 36.3 litres. The electrical system runs on 24 V. The engine fitted is the AH-6UZ1XYSS. Tier III certified. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 65.6 to 396.7 kW; the CX470B sits in the upper part of that range with 270 kW. Its immediate neighbours are the CX490D below it with 269.9 kW and the CX700 above it with 316.9 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine modelAH-6UZ1XYSS, Tier III certifiedcorrect
Power270 kWcorrect
Rated speed1,950 rpmcorrect
Torque1,434.5correct
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement9,832.2 cm³correct
Aspirationturbochargedcorrect
Coolant capacity38.2 lcorrect
Engine oil capacity36.3 lcorrect

Dimensions and weights

Ground clearance542.5correct
Unladen weight47,083 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow720.4 l/mincorrect
Hydraulic oil capacity460.3 lcorrect
Hydraulic pressure314 barcorrect
Fuel tank capacity650.3 lcorrect

Other data

Height3,322.3correct

Where this model stands

Power-to-weight ratio: 5.7 kW/t (270 kW / 47.1 t)

Stronger than 90% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX470B have?

The Case CX470B delivers 270 kW.

How much does the Case CX470B weigh?

The unladen weight is 47,083 kg.

What engine does the Case CX470B have?

6 cylinders, 9,832 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare