StartExcavators & compactionCase › 9050B

Case 9050B

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 9050B, Case offers a model from the Case Hydraulic Excavator series. The engine delivers 179 kW, has 6 cylinders, with a displacement of 10,831.8 cm³. Torque is 1,220.2 Nm. Rated speed is 1,700 rpm. The unladen weight is 33,379.9 kg. Ground clearance is 475.5 mm. The tank holds 579.2 litres. Maximum torque is reached at 1,300 rpm. The pump delivers 269.1 l/min. The hydraulic tank holds 320.2 litres. Working pressure is 318.5 bar. The cooling system holds 57.2 litres. The oil fill is 34.1 litres. The electrical system runs on 24 V. The engine fitted is the M11-C265. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 65.6 to 396.7 kW; the 9050B sits in the lower part of that range with 179 kW. Its immediate neighbours are the CX290B below it with 154.4 kW and the CX330 above it with 184.9 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine modelM11-C265correct
Power179 kWcorrect
Rated speed1,700 rpmcorrect
Torque1,220.2correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement10,831.8 cm³correct
Aspirationturbochargedcorrect
Coolant capacity57.2 lcorrect
Engine oil capacity34.1 lcorrect

Dimensions and weights

Ground clearance475.5correct
Unladen weight33,379.9 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow269.1 l/mincorrect
Hydraulic oil capacity320.2 lcorrect
Hydraulic pressure318.5 barcorrect
Fuel tank capacity579.2 lcorrect

Other data

Height3,112correct

Where this model stands

Power-to-weight ratio: 5.4 kW/t (179 kW / 33.4 t)

Stronger than 76% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 9050B have?

The Case 9050B delivers 179 kW.

How much does the Case 9050B weigh?

The unladen weight is 33,380 kg.

What engine does the Case 9050B have?

6 cylinders, 10,832 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare