StartExcavators & compactionCase › CX135

Case CX135

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case CX135 belongs to the Case Hydraulic Excavator series. The engine delivers 70.8 kW, has 4 cylinders, with a displacement of 2,998.8 cm³. Torque is 359.3 Nm. Rated speed is 2,000 rpm. The unladen weight is 13,440.4 kg. Ground clearance is 432.8 mm. The tank holds 166.6 litres. Maximum torque is reached at 1,600 rpm. The pump delivers 117.3 l/min. The hydraulic tank holds 128.7 litres. Working pressure is 343 bar. The cooling system holds 14.4 litres. The oil fill is 17.4 litres. The electrical system runs on 24 V. The engine fitted is the AJ-4JJ1X. Tier III certified. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 65.6 to 396.7 kW; the CX135 sits at the bottom of that range with 70.8 kW. Its immediate neighbours are the CX135SR below it with 65.6 kW and the CX130B LC above it with 71.1 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine modelAJ-4JJ1X, Tier III certifiedcorrect
Power70.8 kWcorrect
Rated speed2,000 rpmcorrect
Torque359.3correct
Speed at max. torque1,600 rpmcorrect
Cylinders4correct
Displacement2,998.8 cm³correct
Aspirationturbochargedcorrect
Coolant capacity14.4 lcorrect
Engine oil capacity17.4 lcorrect

Dimensions and weights

Ground clearance432.8correct
Unladen weight13,440.4 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow117.3 l/mincorrect
Hydraulic oil capacity128.7 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity166.6 lcorrect

Other data

Height2,743.2correct

Where this model stands

Power-to-weight ratio: 5.3 kW/t (71 kW / 13.4 t)

Stronger than 26% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX135 have?

The Case CX135 delivers 70.8 kW.

How much does the Case CX135 weigh?

The unladen weight is 13,440 kg.

What engine does the Case CX135 have?

4 cylinders, 2,999 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare