StartExcavators & compactionCase › 9030B

Case 9030B

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case Hydraulic Excavator series from Case includes the 9030B. The engine delivers 97.7 kW, has 6 cylinders, with a displacement of 5,883 cm³. Torque is 576.2 Nm. Rated speed is 2,000 rpm. The unladen weight is 20,203 kg. Ground clearance is 457.2 mm. The tank holds 310.4 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 194.2 l/min. The hydraulic tank holds 200.2 litres. Working pressure is 314 bar. The cooling system holds 25.7 litres. The oil fill is 16.3 litres. The electrical system runs on 24 V. The engine fitted is the 6T-590. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 65.6 to 396.7 kW; the 9030B sits at the bottom of that range with 97.7 kW. Its immediate neighbours are the CX160B below it with 89.5 kW and the CX210 NLC above it with 105.1 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine model6T-590correct
Power97.7 kWcorrect
Rated speed2,000 rpmcorrect
Torque576.2correct
Speed at max. torque1,500 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Aspirationturbochargedcorrect
Coolant capacity25.7 lcorrect
Engine oil capacity16.3 lcorrect

Dimensions and weights

Ground clearance457.2correct
Unladen weight20,203 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow194.2 l/mincorrect
Hydraulic oil capacity200.2 lcorrect
Hydraulic pressure314 barcorrect
Fuel tank capacity310.4 lcorrect

Other data

Height2,932.2correct

Where this model stands

Power-to-weight ratio: 4.8 kW/t (98 kW / 20.2 t)

Stronger than 40% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 9030B have?

The Case 9030B delivers 97.7 kW.

How much does the Case 9030B weigh?

The unladen weight is 20,203 kg.

What engine does the Case 9030B have?

6 cylinders, 5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare