StartBackhoe loadersCase › 580T

Case 580T

Series: Case Loader Backhoe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 580T belongs to the Case Loader Backhoe series. The engine delivers 72.3 kW, has 4 cylinders, with a displacement of 4,501.5 cm³. The engine comes from FPT NEF4. Rated speed is 2,200 rpm. The wheelbase measures 2,176.3 mm. Ground clearance is 350.5 mm. The tank holds 126.1 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 156.3 l/min. The hydraulic tank holds 118.1 litres. Working pressure is 205 bar. The cooling system holds 24.2 litres. The electrical system runs on 12 V. The engine fitted is the 445TA/ML5. The Case Loader Backhoe series covers 38 models. Rated output within it ranges from 27.6 to 83.5 kW; the 580T sits in the upper part of that range with 72.3 kW. Its immediate neighbours are the 580 Super M+ Series III below it with 71.1 kW and the 590 Super M above it with 73.1 kW. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine makeFPT NEF4correct
Engine model445TA/ML5correct
Power72.3 kWcorrect
Rated speed2,200 rpmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders4correct
Displacement4,501.5 cm³correct
Coolant capacity24.2 lcorrect

Dimensions and weights

Wheelbase2,176.3correct
Ground clearance350.5correct

Drivetrain and chassis

Gearbox typePowershuttlecorrect
Forward gears4correct
Reverse gears4correct
System voltage12 Vcorrect

Working data

Pump flow156.3 l/mincorrect
Hydraulic oil capacity118.1 lcorrect
Hydraulic pressure205correct
Fuel tank capacity126.1 lcorrect

Frequently asked questions

How much power does the Case 580T have?

The Case 580T delivers 72.3 kW.

What engine does the Case 580T have?

4 cylinders, 4,502 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare