Start › Backhoe loaders › Case › 570N EP

Case 570N EP

Series: Case Loader Backhoe

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 570N EP is a model in the Case Loader Backhoe series. The engine delivers 75 hp (53.7 kW), has 4 cylinders, with a displacement of 3,400.3 cm³. Torque is 318.6 Nm. Rated speed is 2,200 rpm. The unladen weight is 5,051 kg. The wheelbase measures 2,133.6 mm. The tank holds 114.3 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. Maximum torque is reached at 1,400 rpm. The pump delivers 108.3 l/min. The hydraulic tank holds 107.9 litres. Working pressure is 206.8 bar. The electrical system runs on 12 V. The engine fitted is the FPT F5HFL463D. The Case Loader Backhoe series covers 38 models. Rated output within it ranges from 42.1 to 125.7 hp; the 570N EP sits in the lower part of that range with 75 hp. Its immediate neighbours are the 580N EP below it with 74.8 hp and the 580L above it with 76 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 20 verified figures from 1 source are on file.

Technical data

Engine

Engine modelFPT F5HFL463Dcorrect
Power75 hp (53.7 kW)correct
Rated speed2,200 rpmcorrect
Torque318.6correct
Speed at max. torque1,400 rpmcorrect
Cylinders4correct
Displacement3,400.3 cm³correct

Dimensions and weights

Length5,150.1correct
Width2,072.6correct
Wheelbase2,133.6correct
Unladen weight5,051 kgcorrect

Drivetrain and chassis

Gearbox typeSyncroshuttlecorrect
Forward gears4correct
Reverse gears4correct
System voltage12 Vcorrect

Working data

Pump flow108.3 l/mincorrect
Hydraulic oil capacity107.9 lcorrect
Hydraulic pressure206.8correct
Fuel tank capacity114.3 lcorrect

Where this model stands

Power-to-weight ratio: 10.6 kW/t (54 kW / 5.1 t)

Stronger than 30% of the backhoe loaders in the register — out of 271 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 570N EP have?

The Case 570N EP delivers 75 hp.

How much does the Case 570N EP weigh?

The unladen weight is 5,051 kg.

What engine does the Case 570N EP have?

4 cylinders, 3,400 cm³ displacement.

What are the dimensions of the Case 570N EP?

5,150 mm × 2,073 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

480B

480C

480D

480E

480F

580 Super M

580 Super M+ Series III

580 Super N

580 Super N WT

580B

580C

580D

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare