Bulthuis ADGA 10
Built: 2003-2007 · Series: ADGA
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bulthuis ADGA – Dutch low-loader range from 3.2 to 6.9 t unladen weight at 20 to 30 t gross weight, around 9.2 to 10 m long
This page gathers Bulthuis's ADGA range, a Dutch maker of low-loaders for carrying machinery and heavy freight. The ADGA range covers the ADGA 02, 03, 08, 09 and 10 versions with rising payload.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 3,240 to 6,860 kg at a gross weight of 20,000 to 30,000 kg, lengths from 9,180 to 9,980 mm and a constant width of 2,550 mm. With a gross weight consistently above 10 t, the whole range falls into vehicle class O4.
Low-loaders of this size carry excavators, wheel loaders and other construction machinery on a lowered deck that keeps within the gross weight limit even with tall loads. Bulthuis thereby supplies haulage firms and plant hire companies in the Dutch and neighbouring markets; the constant 2,550 mm width keeps every version within the normal road gauge. Trailers of this type usually consist of a gooseneck section, a lowered centre section and a rear section carrying the axles, which allows heavy and tall loads to be carried within the permitted overall height.
Buying used at this class, the points that matter are the condition of the ramps and their locking, wear on the axles and braking system, cracks and corrosion on the chassis, and the function of the lighting. The tightness of the ramp hydraulics and the validity of the periodic roadworthiness test should also be checked; spare parts run through the Bulthuis dealer network.
Sources: SpecCodex register, model data: Bulthuis ADGA
Technical data
Dimensions and weights
| Length | 9,980 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,560 mmcorrect |
| Unladen weight | 4,420 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bulthuis ADGA 10 weigh?
The unladen weight is 4,420 kg.
What is the gross vehicle weight of the Bulthuis ADGA 10?
28,000 kg.
Up to what speed is the Bulthuis ADGA 10 approved?
Approved up to 100 km/h.
What are the dimensions of the Bulthuis ADGA 10?
9,980 mm × 2,550 mm.
When was the Bulthuis ADGA 10 built?
Production years: 2003-2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
