Bucher TM 800-4X4/1660
Built: 1985 · Series: Other models
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bucher CityCat V20: the compact sweeper from Bucher Municipal, 62 kW engine output, 2,700 kg unladen weight, 4,800 kg gross weight, 4,550 mm length
Bucher Municipal, the municipal-technology division of the Swiss Bucher Industries group based in Niederweningen in the canton of Zurich, builds compact road sweepers under the CityCat name for cities and municipalities. The CityCat V20 is one of the smaller versions of this range.
Read on 3 more paragraphs
The V20 carries a diesel engine of 2,970 cm³ displacement producing 62 kW – an output that powers the drive, sweeping rollers and suction fan of a single compact vehicle. With an unladen weight of 2,700 kg and a gross weight of 4,800 kg, about two tonnes remain for sweepings, water tank and bodywork; a length of 4,550 mm and a width of 1,420 mm keep the vehicle narrow enough for pavements and tight old-town streets.
Vehicles of this type are type-approved under EU Regulation (EU) No 167/2013 for agricultural and forestry vehicles, the category into which many compact municipal vehicles with mounted working equipment fall. The bodywork combines sweeping rollers, suction mouth and debris hopper on a manoeuvrable chassis built for daily work on pavements, in pedestrian zones and on narrow streets, not for field use.
When buying a compact sweeper of this size second-hand, the condition of the sweeping rollers and side brooms, the tightness of the suction duct and fan, corrosion on the debris hopper and water tank, and the operating hours of the drive and working hydraulics all matter. Rust on the chassis and the condition of the suction filter system give further insight into how hard the machine has been worked.
Sources: SpecCodex-Register: Kennwerte des Modells Bucher CityCat V20, Bucher Municipal (Bucher Industries, Hersteller)
Technical data
Engine
| Displacement | 1,110 cm³correct |
|---|
Dimensions and weights
| Width | 1,640 mmcorrect |
|---|---|
| Unladen weight | 1,020 kgcorrect |
Frequently asked questions
How much does the Bucher TM 800-4X4/1660 weigh?
The unladen weight is 1,020 kg.
What engine does the Bucher TM 800-4X4/1660 have?
1,110 cm³ displacement.
When was the Bucher TM 800-4X4/1660 built?
Production years: 1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
