Bremach TGR 50-E3 BRICK
Built: 2005 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bremach – other models: the collective page for four-wheel-drive light trucks outside the named series, T-Rex XT to T.REX-X4, 2,800 to 2,998 cc, four cylinders
Bremach, based in Varese, Italy, specialises in compact, off-road four-wheel-drive vehicles and builds its models in small numbers for public authorities, forestry work and specialist applications. This page gathers versions of the T-Rex line outside the named series, from the T-Rex XT through the T.REX Xtreme to the T.REX-X4, which differ mainly in body variant, wheelbase and equipment level while sharing the same compact ladder-frame platform.
Read on 3 more paragraphs
The register lists five versions with 2,800 to 2,998 cc of displacement, a constant four cylinders, kerb weights from 2,890 to 4,680 kg and gross vehicle weights from 3,500 to 6,000 kg; lengths range from 5,350 to 5,750 mm at a width of 1,800 to 1,960 mm.
Bremach's T-Rex models occupy a niche between light pickups and conventional military and municipal vehicles, and are used among other things as municipal, fire and forestry vehicles, as well as exported to hard-to-reach regions where simple mechanics and a short wheelbase matter more than payload. Competition comes mainly from off-road light trucks made by Japanese and American manufacturers.
For a used purchase, checks should cover the condition of the four-wheel-drive system with its transfer case, the sealing of the underbody after off-road use, and the condition of the brake system. Since Bremach builds in small numbers, parts are usually only available directly from the manufacturer or its dealer network.
Sources: SpecCodex register, model data: Bremach (weitere Modelle), Bremach
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,800 cm³correct |
Dimensions and weights
| Width | 1,800 mmcorrect |
|---|---|
| Wheelbase | 3,000 mmcorrect |
| Unladen weight | 2,970 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Bremach TGR 50-E3 BRICK weigh?
The unladen weight is 2,970 kg.
What is the gross vehicle weight of the Bremach TGR 50-E3 BRICK?
3,500 kg.
What engine does the Bremach TGR 50-E3 BRICK have?
4 cylinders, 2,800 cm³ displacement.
When was the Bremach TGR 50-E3 BRICK built?
Production years: 2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.