Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Branson › 5025R

Branson 5025R

Series: 25R

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Branson 5025R belongs to the 25R series. The engine delivers 47 hp (35 kW), has 4 cylinders, with a displacement of 2,286 cm³. Rated speed is 2,600 rpm. The machine is 3,316 mm long, 1,620 mm wide and 2,500 mm high. The unladen weight is 1,790 kg. The wheelbase measures 1,806 mm. Ground clearance is 355 mm. Lifting capacity is 1,500 kg. The engine is water-cooled. The gross vehicle weight is 3,150 kg. The fuel is diesel. The gearbox offers 1 gears. Rated output across the Branson range ranges from 25 to 74 hp; the 5025R sits in the middle of that range with 47 hp. Its immediate neighbours are the 4720i below it with 42.6 hp and the 4720h above it with 47.7 hp. Rated output across the Branson range ranges from 25 to 74 hp; here the 5025R sits in the middle of that range with 47 hp. 52 Branson models across 5 series are on record.

Branson 5025R: lower-power version of the 25R range with the same 2,286cc diesel, producing 35 kW and a 1,500 kg hydraulic lift capacity

The 5025R from the 25R range is the lower-power version within the same engine and chassis programme from Branson Tractors, the South Korean manufacturer of compact farm and estate tractors.

Read on 3 more paragraphs

The 5025R carries the same four-cylinder diesel engine with 2,286 cm³ of displacement as the 25C range, but here limited to 47 hp, or 35 kW, at 2,600 rpm. At 1,790 kg unladen weight, 3,150 kg permissible gross weight, 3,316 mm long, with a 1,806 mm wheelbase and 1,620 mm width and 2,500 mm height, the hydraulics also lift up to 1,500 kg.

The same displacement at lower power than the 6225C shows that Branson covers several power steps within the 25 range with the same base engine. The unchanged lift capacity of 1,500 kg at a lower unladen weight makes the 5025R a lighter but similarly versatile tractor for front-loader and implement work. The water-cooled design with radiator and fan allows continuous use even in hot ambient conditions.

When buying used, the same checkpoints matter as for other compact farm tractors of this build: the condition of the front hydraulics, the tightness of the rear axle and clutch wear. It is also worth comparing the actual engine output against the factory-limited figure if changes have been made to the injection system, since a re-tuned pump can push the engine beyond its intended limit.

Sources: SpecCodex-Register: Kennwerte des Modells Branson 5025R

Technical data

Engine

Fueldieselcorrect
Power47 hp (35 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,286 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,316 mmcorrect
Width1,620 mmcorrect
Height2,500 mmcorrect
Wheelbase1,806 mmcorrect
Ground clearance355 mmcorrect
Unladen weight1,790 kgcorrect
Gross vehicle weight3,150 kgcorrect

Drivetrain and chassis

Gears1correct

Working data

Lifting capacity1,500 kgcorrect

Where this model stands

Power-to-weight ratio: 19.6 kW/t (35 kW / 1.8 t)

Power class: Universal (40–100 hp)

Stronger than 32% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Branson 5025R have?

The Branson 5025R delivers 47 hp.

How much does the Branson 5025R weigh?

The unladen weight is 1,790 kg.

What is the gross vehicle weight of the Branson 5025R?

3,150 kg.

What engine does the Branson 5025R have?

4 cylinders, 2,286 cm³ displacement, Diesel.

How much does the rear linkage of the Branson 5025R lift?

The rear linkage lifts 1,500 kg.

What are the dimensions of the Branson 5025R?

3,316 mm × 1,620 mm × 2,500 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3] [4]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare