Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Branson › 6225C

Branson 6225C

Series: 25C

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Branson 6225C is a model in the 25C series. The engine delivers 60 hp (44 kW), has 4 cylinders, with a displacement of 2,286 cm³. Rated speed is 2,600 rpm. The machine is 3,316 mm long, 1,620 mm wide and 2,463 mm high. The unladen weight is 2,035 kg. The wheelbase measures 1,806 mm. Ground clearance is 355 mm. Lifting capacity is 1,500 kg. The engine is water-cooled. The gross vehicle weight is 3,150 kg. The fuel is diesel. The gearbox offers 1 gears. Rated output across the Branson range ranges from 25 to 74 hp; the 6225C sits in the upper part of that range with 60 hp. Its immediate neighbours are the 5530R below it with 55.8 hp and the 6530 above it with 65.9 hp. Rated output across the Branson range ranges from 25 to 74 hp; here the 6225C sits in the upper part of that range with 60 hp. 52 Branson models across 5 series are on record.

Branson 6225C: South Korean farm tractor from the 25C range with a 2,286cc four-cylinder diesel, 44 kW and a 1,500 kg lift capacity

Branson Tractors is a manufacturer of compact to medium-sized tractors built in South Korea, whose models are sold mainly in North America and Europe as small farm and estate tractors. The 6225C from the 25C range belongs to the mid power class of this line-up.

Read on 3 more paragraphs

The 6225C carries a water-cooled four-cylinder diesel engine with 2,286 cm³ of displacement, producing 60 hp, or 44 kW, at 2,600 rpm. At 2,035 kg unladen weight, 3,150 kg permissible gross weight, 3,316 mm long, with a 1,806 mm wheelbase and 1,620 mm width and 2,463 mm height, the hydraulics lift up to 1,500 kg.

A lift capacity of 1,500 kg at an unladen weight of around two tonnes points to a tractor built for front-loader and rear-implement work on the farm and on grassland, not for heavy arable work on large holdings. The speed of 2,600 rpm at full displacement is typical for a compact four-cylinder diesel of this class. Unlike older evaporative-cooling designs, the water-cooled layout with radiator and fan allows continuous use even in hot conditions.

When buying used, the condition of the front hydraulics and their connections matters, since this tractor class is often run with front or rear loaders and wears accordingly. Also worth checking are the clutch, rear axle seals and tyres, which can wear unevenly on farm tractors through frequent turning on hard surfaces.

Sources: SpecCodex-Register: Kennwerte des Modells Branson 6225C

Technical data

Engine

Fueldieselcorrect
Power60 hp (44 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,286 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,316 mmcorrect
Width1,620 mmcorrect
Height2,463 mmcorrect
Wheelbase1,806 mmcorrect
Ground clearance355 mmcorrect
Unladen weight2,035 kgcorrect
Gross vehicle weight3,150 kgcorrect

Drivetrain and chassis

Gears1correct

Working data

Lifting capacity1,500 kgcorrect

Where this model stands

Power-to-weight ratio: 21.6 kW/t (44 kW / 2 t)

Power class: Universal (40–100 hp)

Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Branson 6225C have?

The Branson 6225C delivers 60 hp.

How much does the Branson 6225C weigh?

The unladen weight is 2,035 kg.

What is the gross vehicle weight of the Branson 6225C?

3,150 kg.

What engine does the Branson 6225C have?

4 cylinders, 2,286 cm³ displacement, Diesel.

How much does the rear linkage of the Branson 6225C lift?

The rear linkage lifts 1,500 kg.

What are the dimensions of the Branson 6225C?

3,316 mm × 1,620 mm × 2,463 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3] [4]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare