Start › Road construction › Bitelli › RG248

Bitelli RG248

Series: Bitelli Pneumatic Roller

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bitelli RG248 is a model in the Bitelli Pneumatic Roller series. The engine delivers 83.5 kW. Rated speed is 2,500 rpm. The wheelbase measures 3,502.2 mm. Ground clearance is 301.8 mm. Top speed is 20.1 km/h. The tank holds 180.2 litres. The electrical system runs on 12 V. The engine fitted is the F6L 912. Rated output within this group ranges from 6.3 to 1,150 kW; the RG248 sits at the bottom of that range with 83.5 kW. Its immediate neighbours are the YZC12 below it with 82.5 kW and the HD PLUS 110i VO above it with 84.9 kW. The model is listed under Road construction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine modelF6L 912correct
Power83.5 kWcorrect
Rated speed2,500 rpmcorrect
Aspirationnaturalcorrect

Dimensions and weights

Width2,121.4correct
Wheelbase3,502.2correct
Ground clearance301.8correct

Drivetrain and chassis

Top speed20.1 km/hcorrect
System voltage12 Vcorrect

Working data

Fuel tank capacity180.2 lcorrect

Frequently asked questions

How much power does the Bitelli RG248 have?

The Bitelli RG248 delivers 83.5 kW.

How fast does the Bitelli RG248 go?

Top speed is 20.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare