Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Belarus › MTZ - 952.3

Belarus MTZ - 952.3

Series: MTZ

The photo shows the MTZ 52 SUPER from the same series. Source: https://www.lectura-specs.com/en/model/agricultural-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Belarus MTZ - 952.3 is a tractor from the MTZ series.

MTZ 820-4X4/245: the four-wheel-drive tractor of the Minsk Tractor Works from 2010, four-cylinder with 60 kW, 4,610 kg unladen weight, 7,030 kg gross weight

The MTZ 820-4X4/245 was built in 2010 at the Minsk Tractor Works, which has built tractors in Minsk under the Belarus brand name since 1946 and supplies more than 100 countries; this example is recorded through the Finnish vehicle register and carries an EU type-approval number, e1*2001/3*0191.

Read on 3 more paragraphs

The four-cylinder diesel engine of 4,750 cm³ displacement produces 60 kW. At a length of 4,110 mm and a width of 2,030 mm, the unladen weight is 4,610 kg and the permissible gross weight 7,030 kg – the difference of around 2,400 kg is available for driver, implements and payload, a margin typical of a four-wheel-drive tractor of this engine power.

The 4X4 designation in the model name denotes the four-wheel drive common on tractors of this power class for traction on loose or wet ground. The leading digit of the EU type-approval number names the country of the approving authority under the internationally standardised vehicle type-approval scheme, under which the vehicle may be registered for use on public roads.

When buying a four-wheel-drive tractor of this size second-hand, the condition of the front axle and its drive shafts, wear on the clutch and shuttle transmission, and the tightness of the hydraulics matter. The difference between unladen weight and permissible gross weight also shows how much payload beyond implements and driver remains possible before the permissible gross mass is exceeded.

Sources: SpecCodex-Register: Kennwerte des Modells MTZ 820-4X4/245, Zulassungsdaten Traficom (Finnland)

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare