Belarus MLPT-354M1
Built: Year not documented · Series: MLPT-354M1
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MLPT-354M1: the heavy special version with a length of 8,550 mm, four-cylinder with 79 kW (107 hp), 10,230 kg unladen weight, top speed 22.9 km/h
The MLPT-354M1 likewise carries the Belarus brand name of the Minsk Tractor Works and, by length and weight, belongs to the same group of heavy special versions as the ML-131 and the MLH-414.
Read on 3 more paragraphs
The four-cylinder diesel engine of 4,750 cm³ displacement produces 79 kW (107 hp) and moves a chassis 8,550 mm long, 3,035 mm wide and 3,500 mm high, with a wheelbase of 4,350 mm and an unladen weight of 10,230 kg. Here too the ratio of engine power to length and weight is well below that of an ordinary field tractor and points to a design focused on load-carrying rather than field work.
At a top speed of 22.9 km/h, the MLPT-354M1 falls within driving licence category L up to 40 km/h. As with the ML-131, the length of over 8.5 metres requires marking as an over-length vehicle in road traffic and corresponding attention when turning and in oncoming traffic on narrow roads.
When buying such a long chassis second-hand, the condition of the frame for distortion, the bearings of the axles across the wheelbase of almost 4.4 metres, and the tightness of the engine and hydraulics matter. Because so few such special versions were built, spare parts for frame and attachment components are usually only obtainable through custom remanufacture or salvage. Given the long wheelbase, it is also worth checking wheel alignment and the condition of the drive joints, since uneven loading of a long chassis wears them faster.
Sources: SpecCodex-Register: Kennwerte des Modells MLPT-354M1
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 107 hp (79 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,750 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 8,550 mmcorrect |
|---|---|
| Width | 3,035 mmcorrect |
| Height | 3,500 mmcorrect |
| Wheelbase | 4,350 mmcorrect |
| Ground clearance | 600 mmcorrect |
| Unladen weight | 10,230 kgcorrect |
Drivetrain and chassis
| Drive | 4×4correct |
|---|---|
| Gearbox | Mechanisches reversibles Getriebecorrect |
| Front tyres | 30, 5R32correct |
| Rear tyres | 30, 5R32correct |
| Top speed | 22.9 km/hcorrect |
Origin and approval
| Construction | Forwardercorrect |
|---|
Where this model stands
Power-to-weight ratio: 7.7 kW/t (79 kW / 10.2 t)
Power class: Large (100–180 hp)
Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Belarus MLPT-354M1 have?
The Belarus MLPT-354M1 delivers 107 hp.
How much does the Belarus MLPT-354M1 weigh?
The unladen weight is 10,230 kg.
What engine does the Belarus MLPT-354M1 have?
4 cylinders, 4,750 cm³ displacement, Diesel.
How fast does the Belarus MLPT-354M1 go?
Top speed is 22.9 km/h.
What are the dimensions of the Belarus MLPT-354M1?
8,550 mm × 3,035 mm × 3,500 mm.
When was the Belarus MLPT-354M1 built?
Production years: ?–?.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.