Belarus MLH-414
Series: MLH
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
MLH-414: the heavy special version with a height of 3,950 mm, four-cylinder with 90 kW (122.5 hp), 11,900 kg unladen weight, top speed 26.5 km/h
Like the ML-131, the MLH-414 carries the Belarus brand name of the Minsk Tractor Works and, by dimensions and weight, likewise belongs to a heavy special version outside the ordinary field tractors of the programme.
Read on 3 more paragraphs
The four-cylinder diesel engine produces 90 kW (122.5 hp) at 2,200 rpm and moves a vehicle 3,035 mm wide and 3,950 mm high, with a wheelbase of 3,800 mm and an unladen weight of 11,900 kg. The considerable height of almost 4 metres, combined with a four-cylinder that is only moderately powered relative to the weight, points to a vehicle design built for a tall superstructure rather than for field work.
At a top speed of 26.5 km/h, the MLH-414 stays within driving licence category L up to 40 km/h. A height of 3,950 mm exceeds the clearance of many gates, bridges and underpasses that apply to ordinary vehicles in road traffic and calls for corresponding attention when planning a route.
When buying such a tall chassis second-hand, the condition of the axle suspension and frame, the tightness of the engine and hydraulics, and the condition of the tyres, which are put under particular strain at this weight, matter most. Because so few such special versions were built, spare parts for the superstructure and frame are usually only obtainable through custom remanufacture. It is also worth checking the welds and mounting points of the superstructure after years of use, since at this height and weight any crack at a mounting point spreads quickly.
Sources: SpecCodex-Register: Kennwerte des Modells MLH-414
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 122.5 hp (90 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Width | 3,035 mmcorrect |
|---|---|
| Height | 3,950 mmcorrect |
| Wheelbase | 3,800 mmcorrect |
| Ground clearance | 600 mmcorrect |
| Unladen weight | 11,900 kgcorrect |
Drivetrain and chassis
| Drive | 4×4correct |
|---|---|
| Top speed | 26.5 km/hcorrect |
Origin and approval
| Construction | articulated framecorrect |
|---|
Where this model stands
Power-to-weight ratio: 7.6 kW/t (90 kW / 11.9 t)
Power class: Large (100–180 hp)
Stronger than 75% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Belarus MLH-414 have?
The Belarus MLH-414 delivers 122 hp.
How much does the Belarus MLH-414 weigh?
The unladen weight is 11,900 kg.
What engine does the Belarus MLH-414 have?
4 cylinders, Diesel.
How fast does the Belarus MLH-414 go?
Top speed is 26.5 km/h.
What are the dimensions of the Belarus MLH-414?
3,035 mm × 3,950 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.