Belarus 2103
Built: 2006–- · Series: 2100
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Belarus 2103: the tractor of the 2100 range from the Minsk Tractor Works, six-cylinder with 156 kW (212 hp), 10,500 kg unladen weight, built since 2006
Belarus is the export brand of the Minsk Tractor Works (MTZ), which has built tractors in the Belarusian capital Minsk since 1946 and, with several million units produced, ranks among the world's largest tractor makers; the brand supplies more than 100 countries, with strongholds in Russia, the successor states of the Soviet Union, Africa and Latin America. The 2100 range is among the more powerful wheeled tractors of the plant, and the 2103 model has been built since 2006.
Read on 3 more paragraphs
Like the 2422, the 2103 carries a water-cooled six-cylinder diesel engine of 7,120 cm³ displacement and 156 kW (212 hp) at 2,100 rpm, but at 10,500 kg unladen weight it is built considerably heavier. With a length of 6,250 mm, a width of 2,100 mm, a height of 2,950 mm and a short wheelbase of 2,300 mm, the emphasis lies on drawbar pull and stability rather than road speed: the top speed is 26 km/h.
At 26 km/h the 2103 falls under driving licence category L, which covers design top speeds up to 40 km/h; the PTO follows the standardised speeds of 540 or 1,000 rpm, and the three-point hydraulics follow ISO 730. The short wheelbase combined with the high unladen weight favours traction during heavy tillage and when pulling implements with a high draft-force requirement.
When buying second-hand, the operating hours, the condition of the injection pump, wear on the clutch and shuttle transmission, and the tightness of the hydraulics after years with heavy three-point implements all matter. Rust on the mudguards and cab, the condition of the axle bearings given the comparatively short wheelbase, and a traceable maintenance history give further insight into how hard the machine has been worked.
Sources: SpecCodex-Register: Kennwerte des Modells Belarus 2103, Minsker Traktorenwerk (MTZ, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 212 hp (156 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,120 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 6,250 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Height | 2,950 mmcorrect |
| Wheelbase | 2,300 mmcorrect |
| Ground clearance | 360 mmcorrect |
| Unladen weight | 10,500 kgcorrect |
Drivetrain and chassis
| Drive | track drivecorrect |
|---|---|
| Gearbox | mechanisches synchronisiertes Stufengetriebe mit 4 Bereichencorrect |
| Top speed | 26 km/hcorrect |
Origin and approval
| Construction | Kettentraktorcorrect |
|---|---|
| Units built | not statedcorrect |
Where this model stands
Power-to-weight ratio: 14.9 kW/t (156 kW / 10.5 t)
Power class: Heavy (> 180 hp)
Stronger than 92% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Belarus 2103 have?
The Belarus 2103 delivers 212 hp.
How much does the Belarus 2103 weigh?
The unladen weight is 10,500 kg.
What engine does the Belarus 2103 have?
6 cylinders, 7,120 cm³ displacement, Diesel.
How fast does the Belarus 2103 go?
Top speed is 26 km/h.
What are the dimensions of the Belarus 2103?
6,250 mm × 2,100 mm × 2,950 mm.
When was the Belarus 2103 built?
Production years: 2006–-.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.