Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Volvo › FL 611 4X2

Volvo FL 611 4X2

Built: 2000 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The FL 611 4X2 from Volvo is part of the Trucks 3.5–12 t (Class N2) series. Production: 2000. The engine delivers 132 kW, with a displacement of 5,500 cm³. The machine is 6,260 mm long and 2,350 mm wide. The unladen weight is 7,950 kg. The gross vehicle weight is 11,000 kg. The Trucks 3.5–12 t (Class N2) series covers 190 models. Rated output within it ranges from 77 to 206 kW; the FL 611 4X2 sits in the middle of that range with 132 kW. Its immediate neighbours are the VOLVO FL 608 4X2 below it with 126 kW and the FL610-FL6L42R-L/370 above it with 147 kW. Unladen weight within it ranges from 3,050 to 10,570 kg; here the FL 611 4X2 sits in the upper part of that range with 7,950 kg. 8903 Volvo models across 145 series are on record.

Volvo trucks 3.5 to 12 t (class N2) – collective page of the FL range for distribution transport: forward-control cab since the 1980s, engines from 77 to 206 kW, gross weights up to 12 t

The EU vehicle class N2 covers trucks from 3.5 to 12 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Volvo range recorded in that class. Almost the entire register consists of the FL range, Volvo's light to medium-duty forward-control truck for urban and regional distribution transport: from the FL6 of the 1980s and 1990s with its compact cab, through the intermediate FL7/FL10 generations, to the modern FL built since 2006. Volvo Trucks belongs to AB Volvo, founded in Gothenburg in 1927, which has also built trucks since 1928.

Read on 3 more paragraphs

The register lists 190 versions with kerb weights of 3,050 to 11,860 kg and gross vehicle weights of 4,500 to 12,000 kg. Engine outputs are recorded for 95 models and range from 77 to 206 kW, displacements from 2,978 to 12,130 cm³ across 4 to 6 cylinders; lengths are recorded for 180 models, from 5,300 to 11,920 mm, width for all 190 from 1,880 to 2,600 mm.

With its compact forward-control cab and, unusually for the class, its variable body width, the FL range covers the entire spectrum from furniture vans through refrigerated boxes to municipal tippers and crane trucks; in distribution transport it competed chiefly against the MAN L/M range, Mercedes-Benz Atego and Iveco Eurocargo.

On a used example, what matters on the older FL6 models is frame corrosion and the condition of the cab mounts, on all model years the brakes, clutch and the condition of the air suspension where fitted; spare parts remain readily available through the Volvo Trucks network even for older model years, which makes the FL range a sought-after used vehicle in distribution transport.

Sources: SpecCodex register, model data: Volvo Lkw 3,5–12 t (Klasse N2), Volvo Trucks (manufacturer)

Technical data

Engine

Power132 kWcorrect
Displacement5,500 cm³correct

Dimensions and weights

Length6,260 mmcorrect
Width2,350 mmcorrect
Unladen weight7,950 kgcorrect
Gross vehicle weight11,000 kgcorrect

Where this model stands

Power-to-weight ratio: 16.6 kW/t (132 kW / 8 t)

Stronger than 15% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Volvo FL 611 4X2 have?

The Volvo FL 611 4X2 delivers 132 kW.

How much does the Volvo FL 611 4X2 weigh?

The unladen weight is 7,950 kg.

What is the gross vehicle weight of the Volvo FL 611 4X2?

11,000 kg.

What engine does the Volvo FL 611 4X2 have?

5,500 cm³ displacement.

What are the dimensions of the Volvo FL 611 4X2?

6,260 mm × 2,350 mm.

When was the Volvo FL 611 4X2 built?

Production years: 2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare