Valmet 602 – specifications
Built: 1980 · Series: Other models
Data for the version built 1980 · Data origin: Official register · sources
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Valmet 602 is a tractor from 1980 belonging to the category of agricultural tractors. This model was manufactured by Valmet and represents a specific series within the portfolio at the time. Designed as a classic field tractor, it is primarily used for field cultivation and the transport of agricultural products. The design reflects the requirements of that era, with mechanical simplicity being the primary focus.
Technically, the drive is based on a three-cylinder engine with a displacement of 3,300 cm³, delivering an output of 43 kW. This engine configuration enables the towing of medium-sized implements and the execution of soil cultivation work. The empty weight of 2,700 kg ensures sufficient traction, while the permissible gross weight of 8,500 kg defines the maximum load capacity for transport tasks. The dimensions of 3,430 mm in length and 1,850 mm in width ensure good maneuverability in the field. The six-speed transmission allows for speed adjustment to various working speeds, ranging from slow soil cultivation gears to faster transport drives.
Within the available data series, the Valmet 602 can be classified as a model in the mid-power class. The six gears provide basic equipment for most typical field tasks, without additional power shift stages. The combination of 43 kW output and a weight of 2,700 kg positions the machine for use with standard implements such as plows or seeders. The three-cylinder design and the specified displacement characterize the technical configuration of this series, which is designed for durability and easy maintenance.
Valmet – other models: the collective page of Finnish tractors outside the named ranges, from the Valmet 20 through the 300 to 700 types to the Mezzo range 6100 to 6850, 11 to 120 kW
This page gathers the Valmet tractors the register could not assign to a named range – from the first tractor designed in Finland to the Mezzo models of the 1980s and 1990s. Valmet emerged from the state-owned Finnish engineering combine Valtion Metallitehtaat and built its own tractors from 1951, starting with the Valmet 15 and the Valmet 20 presented in 1956. The type logic changed over the decades: the three-digit types of the 1960s and 1970s such as 305, 359, 455, 505, 605 and 700 order the power class in ascending order, the suffix -4 and -4X4 marks four-wheel-drive models, the number after the slash an internal equipment or transmission code; the 6000 range (Mezzo) of the 1980s and 1990s from 6100 to 6850 replaced the older ranges. In 1997 the brand passed to Valtra after the sale to the engine maker Sisu.
Read on 3 more paragraphs
The register lists here 112 versions with 11 to 120 kW from three- to six-cylinders of 1,400 to 7,400 cm³, unladen weights from 780 to 6,640 kg, gross weights from 1,250 to 13,000 kg, lengths from about 2,490 to 5,250 mm and widths from 1,430 to 2,640 mm.
Valmet was one of the leading brands in Finland and Scandinavia for decades and shaped the Nordic farm-machinery market with cold-resistant engineering – sturdy cab heating, cold-start-capable diesel engines, sealed drivetrains; part of the output was exported to the former Soviet Union and to Eastern Europe, where the simple technology and parts supply were valued.
On used tractors, rust on panels and cab, clutch and synchro gearbox, hydraulic pump and PTO count on the older ranges, and electronics, cab mounting and engine condition on the Mezzo models of the 6000 range; parts for most model years now run through the Valtra network, which has continued the brand since the 1997 renaming.
Sources: SpecCodex register, model data: Valmet (weitere Modelle), Valtra (Rechtsnachfolger von Valmet)
Versions of this model in the register
Each row is a separate entry with its own data. The figures on this page belong to the row marked ●.
| Version | Built | kW | EU type approval | Origin |
|---|---|---|---|---|
| 602 | 1978–1982 | 42.7 | — | Official register |
| ● Valmet 602 | 1980 | 43 | — | Official register |
Technical data
Engine
| Power | 43 kWcorrect |
|---|---|
| Cylinders | 3correct |
| Displacement | 3,300 cm³correct |
Dimensions and weights
| Length | 3,430 mmcorrect |
|---|---|
| Width | 1,850 mmcorrect |
| Unladen weight | 2,700 kgcorrect |
| Gross vehicle weight | 8,500 kgcorrect |
Drivetrain and chassis
| Gears | 6correct |
|---|
Where this model stands
Power-to-weight ratio: 15.9 kW/t (43 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 40% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 602 have?
The Valmet 602 delivers 43 kW.
How much does the Valmet 602 weigh?
The unladen weight is 2,700 kg.
What is the gross vehicle weight of the Valmet 602?
8,500 kg.
What engine does the Valmet 602 have?
3 cylinders, 3,300 cm³ displacement.
What are the dimensions of the Valmet 602?
3,430 mm × 1,850 mm.
When was the Valmet 602 built?
Production years: 1980.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
455-4
504/2110
6300-4-4X4/233
6400-4-4X4/233
6550-4
702/2240
705/2390
802-4X4
8400-4-4X4/256
8550-4-4X4/275
VALMET 15
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
