Stema Steam Betox 660 H
Built: 1990 · Series: Other models
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stema – other models: the collective page for trailers up to 3.5 tonnes outside the named series, a manufacturer based in Großenhain, Saxony, unladen weight 209–1,120 kg, gross weight 850–3,000 kg
Stema builds trailers in Großenhain, Saxony, and this collective page lists its car trailers outside the named series, from basic models such as Basic to purpose-built versions such as HP 2025 or PT 2004. These versions fall under EU vehicle class O2, covering trailers from 750 kg to 3.5 tonnes gross weight.
Read on 3 more paragraphs
The register lists 11 versions with unladen weights from 209 to 1,120 kg and gross weights from 850 to 3,000 kg. Lengths range from 2,870 to 7,155 mm and widths from 1,490 to 2,350 mm, from compact trailers to long versions for boats or vehicles.
The range from just under 1 tonne to 3 tonnes gross weight shows a broad line-up between simple transport trailers and heavier tandem versions. Stema trailers are used both privately and commercially to carry vehicles, boats and bulky loads, with the longer versions mainly carrying boats and small vehicles.
When buying used, check the overrun brake actuator and brake cables, corrosion on the chassis and axles, and tyre load capacity against the gross weight rating. On the longer tandem versions, also check the stub axle bearings, tread condition and damp under any tarpaulin cover.
Technical data
Dimensions and weights
| Length | 4,200 mmcorrect |
|---|---|
| Width | 2,000 mmcorrect |
| Unladen weight | 1,120 kgcorrect |
| Gross vehicle weight | 1,120 kgcorrect |
Frequently asked questions
How much does the Stema Steam Betox 660 H weigh?
The unladen weight is 1,120 kg.
What is the gross vehicle weight of the Stema Steam Betox 660 H?
1,120 kg.
What are the dimensions of the Stema Steam Betox 660 H?
4,200 mm × 2,000 mm.
When was the Stema Steam Betox 660 H built?
Production years: 1990.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Atour Grande
Basic, BH
Derby
FH7525
HP 1012
HP 2025/305+70
PT 2000/291+71
PT 2004
PT 2004 BB
STEMA, STEMA 02, Basic, BH
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.