Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › Other models › Boxer 335 L3 Hdi

Peugeot Boxer 335 L3 Hdi

Built: 2016 · Series: Other models

More machines from model year 2016

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Boxer 335 L3 Hdi comes from the manufacturer Peugeot. According to the available register data, the vehicle dates from 2016. The van is 6,780 mm long and 2,330 mm wide. The unladen weight is 2,530 kg. The engine delivers 96 kW, has 4 cylinders, with a displacement of 2,198 cm³. The Finnish vehicle register lists one example of this model. The gearbox has 6 gears. The EU type-approval number for this model is e3*2004/46*0045*08.

Peugeot – other models: the collective page of vans outside the named ranges, from the pick-up and van derivatives of the 403, 404 and 504 through the J5 to the Boxer and Partner, 28 to 120 kW, 1,133 to 2,500 cm³

This page gathers Peugeot commercial vehicles the register could not assign to a named range: the pick-up and van derivatives of the 403, 404 and 504 saloons from the 1950s to 1980s, the large J5 van of the 1980s and early 1990s, the Boxer built since 1994, and the compact Partner van built since 1996. Peugeot kept building the 504 saloon's pick-up version, with its robust leaf-spring chassis, long after European production ended, under licence in Kenya and Nigeria. The J5 shared its platform and body with the Citroën C25 and Fiat Ducato from the joint Sevel plant in Val di Sangro.

Read on 3 more paragraphs

The register lists here 22 versions with 28 to 120 kW from four-cylinder engines throughout, of 1,133 to 2,500 cm³, unladen weights from 1,180 to 2,537 kg, lengths from 4,140 to 6,780 mm and widths from 1,620 to 2,330 mm.

The span from the saloon-derived pick-up to the Sevel-built van shows how Peugeot, over decades, offered both robust, simple commercial vehicles for farming and trade overseas and modern vans developed in a modular system with Fiat and Citroën for the European market.

Buying used, the 403/404/504 pick-ups need checking for rust on the frame and load bed and the condition of the leaf springs, the J5 and Boxer for rust on sills and sliding doors, the condition of the turbocharger and injection pump, and the mileage on the gearbox; parts for the Boxer and Partner run through the regular Peugeot network, for the older ranges more limited.

Sources: SpecCodex register, model data: Peugeot (weitere Modelle), Peugeot (manufacturer)

Technical data

Engine

Power96 kWcorrect
Cylinders4correct
Displacement2,198 cm³correct

Dimensions and weights

Length6,780 mmcorrect
Width2,330 mmcorrect
Unladen weight2,530 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 37.9 kW/t (96 kW / 2.5 t)

Stronger than 63% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot Boxer 335 L3 Hdi have?

The Peugeot Boxer 335 L3 Hdi delivers 96 kW.

How much does the Peugeot Boxer 335 L3 Hdi weigh?

The unladen weight is 2,530 kg.

What engine does the Peugeot Boxer 335 L3 Hdi have?

4 cylinders, 2,198 cm³ displacement.

What are the dimensions of the Peugeot Boxer 335 L3 Hdi?

6,780 mm × 2,330 mm.

When was the Peugeot Boxer 335 L3 Hdi built?

Production years: 2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare