Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › THEAULT

Peugeot THEAULT

Built: 2018 · Series: Other models

More machines from model year 2018

The photo shows the Bipper from the same series. Source: https://commons.wikimedia.org/w/index.php?curid=4656772 upl

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The THEAULT comes from Peugeot. Production: 2018. The engine delivers 120 kW, has 4 cylinders, with a displacement of 1,997 cm³. The vehicle is 5,590 mm long and 2,145 mm wide. The unladen weight is 2,537 kg. The wheelbase measures 4,040 mm. The gross vehicle weight is 6,000 kg. The vehicle runs on 4 wheels. The gearbox offers 6 gears. Rated output across the Peugeot range ranges from 28 to 130 kW; the THEAULT sits at the top of that range with 120 kW. Its immediate neighbours are the BOXER FOURGON 3.0HDI-YCDMFC-BX/404 below it with 116 kW and the Boxer-Equi-Trek above it with 121 kW. Unladen weight across the Peugeot range ranges from 890 to 3,750 kg; here the THEAULT sits in the middle of that range with 2,537 kg. 1709 Peugeot models across 26 series are on record.

Peugeot – other models: the collective page of vans outside the named ranges, from the pick-up and van derivatives of the 403, 404 and 504 through the J5 to the Boxer and Partner, 28 to 120 kW, 1,133 to 2,500 cm³

This page gathers Peugeot commercial vehicles the register could not assign to a named range: the pick-up and van derivatives of the 403, 404 and 504 saloons from the 1950s to 1980s, the large J5 van of the 1980s and early 1990s, the Boxer built since 1994, and the compact Partner van built since 1996. Peugeot kept building the 504 saloon's pick-up version, with its robust leaf-spring chassis, long after European production ended, under licence in Kenya and Nigeria. The J5 shared its platform and body with the Citroën C25 and Fiat Ducato from the joint Sevel plant in Val di Sangro.

Read on 3 more paragraphs

The register lists here 22 versions with 28 to 120 kW from four-cylinder engines throughout, of 1,133 to 2,500 cm³, unladen weights from 1,180 to 2,537 kg, lengths from 4,140 to 6,780 mm and widths from 1,620 to 2,330 mm.

The span from the saloon-derived pick-up to the Sevel-built van shows how Peugeot, over decades, offered both robust, simple commercial vehicles for farming and trade overseas and modern vans developed in a modular system with Fiat and Citroën for the European market.

Buying used, the 403/404/504 pick-ups need checking for rust on the frame and load bed and the condition of the leaf springs, the J5 and Boxer for rust on sills and sliding doors, the condition of the turbocharger and injection pump, and the mileage on the gearbox; parts for the Boxer and Partner run through the regular Peugeot network, for the older ranges more limited.

Sources: SpecCodex register, model data: Peugeot (weitere Modelle), Peugeot (manufacturer)

Technical data

Engine

Power120 kWcorrect
Cylinders4correct
Displacement1,997 cm³correct

Dimensions and weights

Length5,590 mmcorrect
Width2,145 mmcorrect
Wheelbase4,040 mmcorrect
Unladen weight2,537 kgcorrect
Gross vehicle weight6,000 kgcorrect

Drivetrain and chassis

Gears6correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 47.3 kW/t (120 kW / 2.5 t)

Stronger than 81% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot THEAULT have?

The Peugeot THEAULT delivers 120 kW.

How much does the Peugeot THEAULT weigh?

The unladen weight is 2,537 kg.

What is the gross vehicle weight of the Peugeot THEAULT?

6,000 kg.

What engine does the Peugeot THEAULT have?

4 cylinders, 1,997 cm³ displacement.

What are the dimensions of the Peugeot THEAULT?

5,590 mm × 2,145 mm.

When was the Peugeot THEAULT built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare