Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Massey Ferguson › 4709

Massey Ferguson 4709

Built: 2018 · Series: Other models

More machines from model year 2018

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

4709 comes from the manufacturer Massey Ferguson. According to the available register data, the vehicle dates from 2018. The tractor is 4,454 mm long and 2,110 mm wide. The unladen weight is 3,900 kg. The permitted gross weight is 6,200 kg. The engine delivers 70 kW, with a displacement of 3,296 cm³. The Finnish vehicle register lists one example of this model. The EU type-approval number for this model is e13*167/2013*00134.00.

Massey Ferguson – other models: collective page of tractors outside the named ranges, from the 100 series to the 8000 series, 22 to 216 kW, Perkins and other diesel engines

This page gathers the Massey Ferguson tractors the register could not assign to a named range, from compact four-cylinder models to large four-wheel-drive tractors of the 8000 class. Massey Ferguson was formed in 1953 from the merger of Massey-Harris with Harry Ferguson's tractor firm and has belonged to AGCO since 1994. The type logic changed several times: three-digit types order size in ascending order, four-digit ranges such as the 4245 or 6480 give the range in the thousands digit and the model in the remaining digits, and the 4X4 suffix marks four-wheel drive. The entry TE-A-20 belongs to the licence-built Ferguson TE-20 from the transitional years after the merger.

Read on 3 more paragraphs

The register lists here 40 versions with 22 to 216 kW from three- to eight-cylinder engines of 1,750 to 10,500 cm³, unladen weights of 1,100 to 9,200 kg, gross weights up to 13,180 kg, lengths of 2,769 to 5,200 mm, widths of 1,500 to 2,720 mm and heights up to 3,200 mm; torque ranges from 176.8 to 593 Nm at rated speeds of 1,600 to 2,250 rpm.

By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France and Scandinavia; the models listed here span the full range from yard tractor to large field tractor.

When buying used, on the smaller model years the radiator, head gasket and hydraulic pump matter, on the large 4x4 models the transfer case, front axle and electronics; rust on mudguards and steps is common on older models. Parts run through AGCO and Perkins as well as a broad independent market.

Sources: Kennwerte der Modelle Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Power95 hp (70 kW)correct
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement3,296 cm³correct

Dimensions and weights

Length4,454 mmcorrect
Width2,110 mmcorrect
Wheelbase2,250 mmcorrect
Unladen weight3,900 kgcorrect
Gross vehicle weight6,200 kgcorrect

Drivetrain and chassis

GearboxDyna Synchroshift 12/12correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity120 lcorrect

Where this model stands

Power-to-weight ratio: 17.9 kW/t (70 kW / 3.9 t)

Power class: Universal (40–100 hp)

Stronger than 63% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Massey Ferguson 4709 have?

The Massey Ferguson 4709 delivers 95 hp.

How much does the Massey Ferguson 4709 weigh?

The unladen weight is 3,900 kg.

What is the gross vehicle weight of the Massey Ferguson 4709?

6,200 kg.

What engine does the Massey Ferguson 4709 have?

3 cylinders, 3,296 cm³ displacement.

How fast does the Massey Ferguson 4709 go?

Top speed is 40 km/h.

What are the dimensions of the Massey Ferguson 4709?

4,454 mm × 2,110 mm.

When was the Massey Ferguson 4709 built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare