International 584/2150
Built: 1980 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Cylinders | 3correct |
|---|---|
| Displacement | 3,380 cm³correct |
Dimensions and weights
| Width | 1,770 mmcorrect |
|---|---|
| Unladen weight | 2,810 kgcorrect |
Drivetrain and chassis
| Gears | 4correct |
|---|
Frequently asked questions
How much does the International 584/2150 weigh?
The unladen weight is 2,810 kg.
What engine does the International 584/2150 have?
3 cylinders, 3,380 cm³ displacement.
When was the International 584/2150 built?
Production years: 1980.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.