Gray And Adams GADD3T/8
Built: 2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Gray and Adams – other models: refrigerated and dry-freight semi-trailers outside the named ranges, GA type series from GA2F1 to GADD3T, gross weight 31 to 38 t, length up to 14.05 m
This page gathers the semi-trailers listed in the vehicle register under the name Gray and Adams that could not be assigned to a named range. Gray & Adams of Fraserburgh in Scotland is a British maker of refrigerated and dry-freight semi-trailers; the type codes GA2F1, GA2SS, GA2T, GA3BS, GA3TDD and GADD3T all carry the maker's initials GA. With unladen weights from 9.2 tonnes and gross weights up to 38 tonnes, all the semi-trailers listed here fall into class O4, the heavy semi-trailers.
Read on 3 more paragraphs
The register lists here 15 versions with unladen weights from 9,200 to 14,800 kg, gross weights from 31,000 to 38,000 kg, lengths from 10,250 to 14,050 mm and widths from 2,530 to 2,600 mm.
Refrigerated semi-trailers of this type carry food and other temperature-sensitive goods in long-haul transport and are fitted with their own refrigeration unit, insulated walls and often several temperature zones; alongside makers such as Schmitz Cargobull and Chereau, Gray & Adams is one of the established names in this market segment in Britain and Ireland.
When buying used, check the condition and running hours of the refrigeration unit, the tightness of the insulated walls and floor, the axles, brakes and air suspension, the condition of the kingpin and fifth-wheel plate, and the seals on the rear doors; rust on the floor cross members is a common weak point on older refrigerated semi-trailers.
Sources: Kennwerte der Modelle Gray and Adams (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 10,500 kgcorrect |
Frequently asked questions
How much does the Gray And Adams GADD3T/8 weigh?
The unladen weight is 10,500 kg.
What are the dimensions of the Gray And Adams GADD3T/8?
12,000 mm × 2,550 mm.
When was the Gray And Adams GADD3T/8 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.